Abstract:The ejector refrigeration technology driven by low-grade heat sources constitutes as one of the crucial means to solve the energy shortage in present-day society and to reduce the global environmental pollution. Thermodynamics ejector models are the basis of performance prediction, system control and structural design in ejector refrigeration systems driven by low-grade heat sources. However, the majority of present ejector models are unable to simultaneously meet the general feasibility of full operating conditions and the level of prediction accuracy for improving the energy efficiency of the refrigeration system. In this study, a novel theoretical model of ejectors is successfully derived based on the foundation of compound-choking theory and gas dynamic relations, which easily predicts the entrainment performance under the on-design and off-design conditions in ejector refrigeration systems. Indeed, a direct solution algorithm is presented to quickly and accurately solve this model and a linear correlation is employed between the mixing loss coefficient and the back pressure at the subcritical mode. The developed model is verified with experimental results in R245fa, R134a and R600a ejector refrigeration system. The results show that the model provides a precise estimation of the entrainment performance with the mean relative errors of 2.45 %, 5.49 % and 3.67 % for R245fa, R134a and R600a refrigerants at full working conditions, while the prediction of critical condensing temperatures is considerably approximated by the experimental measurements. In the comparative analysis with the previous model, this model demonstrates a superior prediction performance, especially in the subcritical mode using the linear function mixing loss coefficient. This study will be a valuable aid in the improvement of energy efficiency in ejector refrigeration systems.

Development of Control Model for Critical Operation Ejector

Simplified Ejector Model for Control and Optimization

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

A 1D model to predict ejector performance at critical and sub-critical operational regimes

A full operating conditions ejector model for refrigeration systems driven by low-grade heat sources

An Investigation on the Component Efficiencies of a Small Two-Phase Ejector

1D Model to Predict Ejector Performance at Critical and Subcritical Operation in the Refrigeration System

A 1D Model to Predict Ejector Performance at Critical and Sub-Critical Operational Regimesmodèle Unidimensionnel Utilisé Pour Prévoir La Performance D'un Éjecteur Sous Des Conditions De Fonctionnement Critiques Et Sous-Critiques

Progress of mathematical modeling on ejectors

Dynamic Simulation on Operating Modes of Ejector in Transcritical Co2 Ejector Expansion Refrigeration Cycles

Analysis on the Optimal Mixing Pressure and Efficiency Limit of an Ideal Ejector

Experimental validation of a hybrid ejector model with refrigerant R141B

Modelling, Optimization, and Experimental Studies of Refrigeration CO2 Ejectors: A Review

Novel Ejector Model for Performance Evaluation on Both Dry and Wet Vapors Ejectors

Dynamic Model of a Transcritical CO2 Ejector Expansion Refrigeration System

Shock Circle Model for Ejector Performance Evaluation

Numerical Study on the Structural Optimization of R290 Two-Phase Ejector with a Non-Equilibrium CFD Model

Research on Co2 Ejector Component Efficiencies by Experiment Measurement and Distributed-Parameter Modeling

Dynamic Simulation Study on Regulation Characteristics of Transcritical CO2 Multi-Ejector Refrigeration System

Experimental and modeling studies of thermally-driven subcritical and transcritical ejector refrigeration systems

A physics-based hybrid model for supercritical CO2 ejector in critical flow regime