Abstract:To understand the effect of CaCl2 addition on the dephosphorization ability of steelmaking slags, laboratory experiments were carried out to study the phosphorus distribution between CaO–SiO2–FeOx–P2O5–CaCl2 slags and carbon-saturated iron at steelmaking temperature. The phosphorus distribution ratio between slag and pure iron foil (\( L_{\text{P}}^{{{\text{Fe-}}\gamma }} \)) was measured by equilibrium experiments and converted into the phosphorus distribution ratio between slag and carbon-saturated iron (\( L_{\text{P}}^{{\text{Fe}}{-}{\text{C}}} \)) using thermodynamic calculations. The influential mechanism of CaCl2 was also discussed based on the phases in the slags. It was found that the addition of CaCl2 is beneficial for the improvement of \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \). In the slag with basicity (R = [w(CaO)/w(SiO2)]) of 1.0, the P content in the liquid slag was increased by the addition of CaCl2. When the basicity is sufficiently high (e.g., R≥1.5), the addition of CaCl2 enhances the generation of P-rich solid phases, including both 2CaO·SiO2–3CaO·P2O5 (C2S–C3P) and Ca5Cl(PO4)3. Compared with CaCl2-free slags, CaCl2 addition in BOF slags doesn't evidently change the effects of slag basicity and FeOx content. With the increase of slag basicity (1.0 to 2.0), the amount of C2S–C3P solid solution in the slag climbs obviously, resulting in a higher \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \) both in CaCl2-added slags and CaCl2-free slags, while \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \) increases first and then decreases when the FeOx content varies from 15 to 35 pct in this study.

Clarification Of The Dissolution Of Solid Cao And The Phosphorus-Enrichment Capability Of Calcium Silicates In The Multiphase Slag Based On The Ion And Molecule Coexistence Theory

Thermodynamic Analysis of Mineral Phase Composition of Steel Slag System

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Effect of CaCl2 Addition on Phosphorus Distribution Between CaO–SiO2–FeOx–P2O5 Slag and Carbon-Saturated Iron at Steelmaking Temperature

Kinetics of Dephosphorization at Different Slag Basicities in the Double Slag Converter Steelmaking Process

Wet magnetic separation of phosphorus containing phase from modified BOF slag

Effect of CaO-MgO-FeO-SiO2-xNa2O Slag System on Converter Dephosphorization

Phosphorus Distribution between CaO-CaF2-SiO2 Melts and Carbon-saturated Iron

Dephosphorization Kinetics of Hot Metal at Low Slag Basicity and Low Temperature under the Different Fe2O3 Addition Amounts

A Kinetic Study on Selective Leaching of Phosphorus from Dephosphorization Slag

Mechanistic study on calcium ion diffusion into fayalite: A step toward sustainable management of copper slag

Dissolution of Carbon-Containing Species in CaO-SiO 2 -Al 2 O 3 Slag

Effect of unmelted lime on the element distribution behavior on a CaO-SiO2-MgO-Al2O3-FeO-CaF2(-Cr2O3) slag

Effect of Temperature on Dephosphorization of Hot Metal in Double‐Slag Converter Steelmaking Process by High‐Temperature Laboratorial Experiments

Distribution and enrichment of phosphorus in solidified BOF steelmaking slag

The Effect of SiC on the Phase Composition and Structure of Mixed Slag

Influence of the Basicity on Phosphorus Enrichment Properties of Decarbonization Slag in Low‐Carbon Double Slag Converter Steelmaking Process with Industrial Experiments, Mineralogy, and Ion–molecule Coexistence Theory

Study on Efficient Dephosphorization in Converter Based on Thermodynamic Calculation

Fe/SiO2 Ratio on the Properties, Microstructure and Fe-Containing Phases of Nickel Matte Smelting Slag