Abstract:The microstructure and properties of cobalt-free cost-effective AlCrFe2Ni2 high entropy alloy (HEA) in the as-cast condition and after thermo-mechanical processing by severe cold-rolling and annealing were investigated in the present work. The as-cast HEA showed a heterogeneous microstructure consisting of relatively coarse lamellar and much finer intertwined regions. The coarse regions consisted of eutectic mixture of FCC and ordered B2 (along with minor BCC) phases. The FCC phase was enriched in Fe and Cr, while the B2 phase was found enriched in Ni and Al but depleted in Cr. The BCC/B2 phase in the as-cast material showed phase separation due to spinodal decomposition to two different B2 phases in the fine regions. The overall FCC phase and BCC/B2 phase fractions were ∼60% and 40%, respectively. Despite the complex microstructure, the presence of a high fraction of the ductile FCC phase rendered remarkable workability, allowing heavy cold-rolling up to 90% reduction in thickness. Heavy deformation resulted in the development of intriguing microstructural features such as folding and bending of the lamellae, local shearing, and finally, deformation-induced nanocrystallization of the FCC phase. However, the B2 phase retained the ordered structure even after 90% cold-rolling. Annealing at 800 °C resulted in the formation of an ultrafine microduplex structure with significant resistance to grain growth even up to an annealing temperature of 1200 °C. A high yield (∼880 MPa) and tensile strength (̴ 1100 MPa) coupled with appreciable elongation (∼10%) could be achieved after annealing at 800 °C. The tensile properties obtained were superior to the other cobalt-free HEAs, which indicate the promising application of the cobalt-free cost-effective AlCrFe2Ni2 HEA as an advanced structural material.

Enhanced Strength and Ductility of Bulk CoCrFeMnNi High Entropy Alloy Having Fully Recrystallized Ultrafine-Grained Structure

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Hot cracking, crystal orientation and compressive strength of an equimolar CoCrFeMnNi high-entropy alloy printed by selective laser melting

Development of a large size FCC high-entropy alloy with excellent mechanical properties

Metastable Phase Separation and Crystalline Orientation Feature of Electromagnetic Levitation Processed CoCrCuFeNi High Entropy Alloy

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Exceptional strength–ductility combination of CoCrFeMnNi high-entropy alloy with fully recrystallized structure by selective laser melting after post-deformation annealing

Alloying Behavior and Novel Properties of CoCrFeNiMn High-Entropy Alloy Fabricated by Mechanical Alloying and Spark Plasma Sintering

A Novel FeCoNiCr0.2Si0.2 High Entropy Alloy with an Excellent Balance of Mechanical and Soft Magnetic Properties

Microstructural Origins for a Strong and Ductile Al0.1CoCrFeNi High-Entropy Alloy with Ultrafine Grains

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Effect of Annealing Treatments on Microstructure, Tensile and Wear Properties of Cold-Rolled FeCoCrNiMn High Entropy Alloy

Strength-ductility Synergy of Al0.3CoCrFeNiCu High-Entropy Alloy Via Cold Rolling and Subsequent Annealing

An As-Cast High-Entropy Alloy With Remarkable Mechanical Properties Strengthened By Nanometer Precipitates

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

A Novel Ultrafine-Grained High Entropy Alloy with Excellent Combination of Mechanical and Soft Magnetic Properties

A Novel High-Entropy Alloy with Exceptional Strength and Elongation Via Bimodal Grains and Lamellar Nano-Precipitates

Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing

Yield strength-ductility trade-off breakthrough in Co-free Fe40Mn10Cr25Ni25 high-entropy alloys with partial recrystallization

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Enhanced strength and slightly reduced ductility in a high entropy alloy via cold rolling and annealing