Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

Effect of Annealing Treatment on the Uniformity of CeO 2 /tio 2 Bilayer Resistive Switching Memory Devices

Elimination of Endurance Degradation by Oxygen Annealing in Bilayer ZnO/CeO2-x Thin Films for Nonvolatile Resistive Memory

Optimization of the Cycle Numbers of TiO 2 Resistive Random-Access Memory Devices by Annealing

Optimization of the Cycle Numbers of TiO2 Resistive Random-Access Memory Devices by Annealing

Influence of Argon and Oxygen Pressure Ratio on Bipolar-Resistive Switching Characteristics of CeO 2− X Thin Films Deposited at Room Temperature

Effects of annealing temperatures on resistive switching characteristics of TiO2 based ReRAM

Study of the Resistive Switching Characteristics and Mechanisms of Pt/CeOx/TiN Structure for RRAM Applications

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory

Annealing Effects on the Charging–Discharging Mechanism in Trilayer Al 2 O 3 /Ge/Al 2 O 3 Memory Structures

The annealing temperature dependence of the RRAM effect and the oxygen vacancy mechanism for double perovskite Bi 2 FeCrO 6 film

Improved Resistance Switching Characteristics of BiFeO3 Thin Film by Increasing the Annealing Temperature

Structure evolution of the interfacial layer of BaTiO3 thin films during annealing process and related good resistive switching behaviors

Enhanced Resistive Switching Performance in Bilayer Pt/TiO2/Co3O4/Pt Memory Device

Improvements in Resistive and Capacitive Switching Behaviors in Ga2O3 Memristors via High-Temperature Annealing Process

Enhanced Resistive Switching Performance of Spinel MnCo2O4 Resistive Random Access Memory Devices: Effects of Annealing Temperatures and Annealing Atmospheres

Mechanism for an enhanced resistive switching effect of bilayer NiOx/TiO2 for resistive random access memory

Effect of Annealing Conditions on Resistive Switching in Hafnium Oxide-based MIM Devices for Low-power RRAM

Effect of Annealing Temperature for Ni/AlOx/Pt RRAM Devices Fabricated with Solution-Based Dielectric

Resistive Switching Behaviors of a Cu/MnO2/FTO Device under Different Annealing Temperatures

Role and optimization of thermal rapid annealing in Ta/TaOx/Ru based resistive switching memory