Abstract:Simple and low cost vanadyl oxalate (VOC2O4) has been identified as efficient hole transporting layer (HTL) in organic solar cells to facilitate high efficiency and stability. The robust VOC2O4 HTL can be fabricated with wide conditions, especially annealing at 200 °C and treated with UV‐ozone affording a top efficiency of 18.94% with a fill factor of 80% in binary OSCs. Organic solar cells (OSCs) with the conventional configuration usually use polyethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS) as the hole‐transporting layer (HTL); however, its acidity tends to affect the performance and long‐term stability of the devices. Therefore, replacing PEDOT:PSS with other more stable HTLs is essential for realizing the practical applications of OSCs. To achieve this goal, a simple and low‐cost vanadyl oxalate (VOC2O4) is identified as a HTL to facilitate high power conversion efficiencies (PCEs), good stability, and high thickness tolerance to be achieved in OSCs. The VOC2O4 thin film can be easily prepared by spin‐coating from its aqueous solution onto ITO/glass substrate and thermally annealed at 100 °C to exhibit high transmittance, conductivity, and work function. It can be applied as a robust HTL with wide processing conditions, especially after being heated at 200 °C and treated with UV‐ozone (UVO) to afford a very high PCE of 18.94% in OSCs. This value is among the highest PCEs obtained for binary OSCs. In addition, the derived OSCs exhibit high thickness tolerance and better stability than those based on PEDOT:PSS as HTL. These results reveal that VOC2O4 is an excellent HTL for OSCs, having great potential for large‐area device applications.

Cesium-Doped Vanadium Oxide As the Hole Extraction Layer for Efficient Perovskite Solar Cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Atomic-layer-deposited Ultra-Thin VOx Film As a Hole Transport Layer for Perovskite Solar Cells

Solution-Processed Kesterite Cu2znsns4 As Efficient Hole Extraction Layer For Inverted Perovskite Solar Cells

Efficient Polymer Solar Cells Based on Solution‐processed Vanadium Oxide As Hole‐extracting Layer

Solution-processed VOxprepared Using a Novel Synthetic Method As the Hole Extraction Layer for Polymer Solar Cells

Enhancing the Performance of Perovskite Solar Cell Via Optimizing the Solvent of Hole Transport Layer

Kesterite Cu2znsns4 As A Low-Cost Inorganic Hole-Transporting Material for High-Efficiency Perovskite Solar Cells

Self‐Organized Co3O4‐SrCO3 Percolative Composites Enabling Nanosized Hole Transport Pathways for Perovskite Solar Cells

Self‐Organized Co 3 O 4 ‐SrCO 3 Percolative Composites Enabling Nanosized Hole Transport Pathways for Perovskite Solar Cells

Kesterite Cu 2 ZnSnS 4 as a Low-Cost Inorganic Hole-Transporting Material for High-Efficiency Perovskite Solar Cells

Solution-processed CuOx As an Efficient Hole-Extraction Layer for Inverted Planar Heterojunction Perovskite Solar Cells

Highly-efficient and low-temperature perovskite solar cells by employing a Bi-hole transport layer consisting of vanadium oxide and copper phthalocyanine.

Simple and Low‐Cost Vanadyl Oxalate as Hole Transporting Layer Enables Efficient Organic Solar Cells

Colloidal CsCu5S3 nanocrystals as an interlayer in high-performance perovskite solar cells with an efficiency of 22.29%

Promoting the Hole Extraction with Co3O4 Nanomaterials for Efficient Carbon‐Based CsPbI2Br Perovskite Solar Cells

Reduced Graphene Oxide/CZTSxSe1‐x Composites As a Novel Hole‐Transport Functional Layer in Perovskite Solar Cells

Cs2SnI6 nanocrystals enhancing hole extraction for efficient carbon-based CsPbI2Br perovskite solar cells

High Electron Affinity Enables Fast Hole Extraction for Efficient Flexible Inverted Perovskite Solar Cells

Enhanced Perovskite Solar Cells with Cesium-Doped Tio2 Compact Layer

Hole-Transporting Low-Dimensional Perovskite for Enhancing Photovoltaic Performance