Abstract:Reflective imaging systems form an important part of photonic devices such as spectrometers, telescopes, augmented and virtual reality headsets or lithography platforms. Reflective optics provide unparalleled spectral performance and can be used to reduce overall volume and weight. So far, most reflective designs have focused on two or three reflections, while four-reflection freeform designs can deliver a higher light throughput (faster F-number) as well as a larger field-of-view (FOV). However, advanced optical design strategies for four-reflection freeform systems have been rarely reported in literature. This is due to the increased complexity in solution space but also the fact that additional mirrors hinder a cost-effective realization (manufacture, alignment, etc.). Recently, we have proposed a novel design method to directly calculate the freeform surface coefficients while merely knowing the mirror positions and tilts. Consequently, this method allows laymen with basic optical design knowledge to calculate 'first time right' freeform imaging systems in a matter of minutes. This contrasts with most common freeform design processes, which requires considerable experience, intuition or guesswork. Firstly, we demonstrate the effectiveness of the proposed method for a four-mirror high-throughput telescope with 250mm-focal-length, F/2.5 and a wide rectangular FOV of 8.5° x 25.5°. In a subsequent step, we propose an effective three-mirror but four-reflection imaging system, which consists of two freeform mirrors and one double-reflection spherical mirror. Compared with common three-mirror and three-reflection imagers, our novel multi-reflection system shows unprecedented possibilities for an economic implementation while drastically reducing the overall volume.

Point-by-point design method for mixed-surface-type off-axis reflective imaging systems with spherical, aspheric, and freeform surfaces.

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design of reflective lens with Zernike polynomial free form surfaces

Designing Two Freeform Surfaces with Monge–Ampère Equation Method for Point-Like Sources

Full-field Point-by-point Direct Design Method of Off-Axis Aspheric Imaging Systems

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Direct design of freeform surfaces and freeform imaging systems with a point-by-point three-dimensional construction-iteration method.

Design Method of Freeform Off-Axis Multi-Mirror Optical Systems

Design method of freeform off-axis three-mirror reflective imaging systems

Automated design of freeform imaging systems

Method to design two aspheric surfaces for imaging system

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

Efficient Optimal Design of Smooth Optical Freeform Surfaces Using Ray Targeting

Application of Freeform Surfaces in Designing Off-axis Reflective Space Optical Imaging Systems

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Highly compact optical design of an off-axis three-mirror system with freeform surfaces

Freeform imaging system design with multiple reflection surfaces

Feedback Modification Strategy for Designing a Free-Form Optical Surface with Given Illumination Pattern

Designing an optical disk lens without analytical definition of aspheric surfaces.

Design of A Freeform, Dual Fields-Of-View, Dual Focal Lengths, Off-Axis Three-Mirror Imaging System with A Point-By-Point Construction-Iteration Process