Abstract:As the main seismic component of a bridge, seismic damage to the bridge pier has a greater effect on its subsequent service. In the offshore chloride environment, the issues (e.g., reinforcement bar corrosion and attenuation of concrete strength) of piers caused by chloride ion seriously curtail the normal service life and deteriorate the anti-seismic property of bridge structures. The engineered cementitious composite (ECC)-reinforced concrete (RC) composite pier with high strength reinforcement bars (HSRB) is expected to solve the above problems. This study aims to clarify the time-varying seismic vulnerability (SV) of the HSRBECC-RC composite pier during its full life cycle (FLC). Based on OpenSees, the refined finite element analysis models of RC pier, ECC-RC composite pier, and HSRBECC-RC composite pier have been established. Moreover, using the nonlinear time-path dynamic analysis method, the influence of chloride ion erosion on the time-dependent seismic vulnerability (SV) of these different piers in different service life and different peak ground acceleration (PGA) were analyzed from a dynamic point of view. The research shows that the exceeding probability (EP) of the same damage level increases with the enhancement of service time and PGA and with the increase of destruction, the exceeding probability (EP) of slight damage (DL-1), moderate damage (DL-2), serious damage (DL-3), and complete collapse (DL-4) decreases in turn; the corrosion degree of chloride ion to piers is small during the early service period, the time-varying vulnerability curve of the bridge piers is almost the same as that of a new bridge, and during later service, as the extent of chloride ion corrosion deepens, exceeding probability (EP) under severe damage (DL-3) and complete collapse (DL-4) is increased, and the seismic performance is significantly enhanced.

Cyclic Behavior of Corroded Reinforced Concrete Bridge Piers

Effect Of Corroded Surface Morphology On Ultra-Low Cycle Fatigue Of Steel Bridge Piers

Performance of Corroded Bridge Piers under Cyclic Loading

Probability-Based Performance Degradation Model and Constitutive Model for the Buckling Behavior of Corroded Steel Bars

Simplified Structural Deterioration Model for Reinforced Concrete Bridge Piers under Cyclic Loading 1

Seismic Performance of Reinforced Corroded Concrete Bridge Piers

Influence of Longitudinal Bar Corrosion on Impact Behavior of RC Beams

Effects of Reinforcement Corrosion and Sustained Load on Mechanical Behavior of Reinforced Concrete Columns.

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Mechanical Degradation of Reinforced Concrete Columns Corroded Under Sustained Loads

EXPERIMENT RESEARCH ON SEISMIC PERFORMANCE OF CORRODED REINFORCED CONCRETE PIER

Performance of Corroded Reinforced Concrete Columns under the Action of Eccentric Loads

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Numerical investigation of the influence of cross-sectional shape and corrosion damage on failure mechanisms of RC bridge piers under earthquake loading

Experimental Investigation on Cyclic Behavior of Coastal Bridge Piers with Non-Uniform Corrosion under Biaxial Quasi-Static Loads

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment

Study on Degradation Regularity of Bearing Capacity of RC Beams under Corrosive Conditions

Reinforcement Corrosion in RC Hollow Piers: Destructive and Non-Destructive Tests

Seismic performance evaluation of steel circular hollow section bridge piers with corroded ends

Hysteretic model of reinforced concrete bridge piers based on earthquake damage and corrosion from saline soil

Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion