Abstract:MnO 2 is an attractive material owing to its high specific capacitance, excellent electrochemical activity, thermal and chemical stability, environmental benignity and broad potential window. However, its poor electrical conductivity limits its performance in supercapacitor applications. The electrical conductivity of MnO 2 can be enhanced by making its composites with carbon nanomaterials as these offer superior electrical conductivity and high specific surface area. The present study is a comparative study on the effect of various types of carbon nanomaterials such as carbon nanotubes (CNTs), graphene oxide, thermally reduced graphene oxide, activated carbon and carbon nanofibers on the supercapacitive performance MnO 2 electrodes by making composite electrodes. MnO 2 was synthesized by a facile chemical reduction method, and calcination was performed at 200 °C to obtain amorphous state. MnO 2 -based composite electrodes were prepared using 10 wt.% of various carbon nanomaterials. Characterization of different carbon materials was carried out by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and atomic force microscopy. Composite electrodes were prepared by coating mixture, consisting of MnO 2 , carbon nanomaterials, carbon black and polyvinylidene fluoride on the surface of highly porous Ni foam using a high-speed vacuum planetary centrifugal mixer. Electrochemical characterization of the prepared electrodes was performed by cyclic voltammetry, galvanostatic charge discharge (GCD) and electrochemical impedance spectroscopy (EIS). GCD revealed that MnO 2 -CNTs composite electrodes showed maximum specific capacitance (SC) of 330 F/g at 1 A/g current density and areal capacitance of 3.16 F/cm 2 with 5–7 mg mass loading of active material in 3 M KOH as an aqueous electrolyte. This SC was ca. 79% higher than pure MnO 2 and also higher than previously reported MnO 2 /CNTs composite electrodes. MnO 2 -CNTs symmetric supercapacitor device showed excellent SC of 177 F/g at 1 A/g current density with 94% charge retention after 1000 GCD cycles. EIS analysis showed that MnO 2 -CNTs composite electrode had the lowest charge transfer resistance compared to other electrodes.

Synthesis and Control of High-Performance Mno2/Carbon Nanotubes Nanocomposites for Supercapacitors

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors

Synthesis of MnO2/N-doped Ultramicroporous Carbon Nanospheres for High-Performance Supercapacitor Electrodes

Synthesis and Electrochemical Performance of MnO2/CNTs–embedded Carbon Nanofibers Nanocomposites for Supercapacitors

MnO 2 /Porous Carbon Nanotube/MnO 2 Nanocomposites for High-Performance Supercapacitor

Enhanced Electrochemical Performance of Mn3O4/Multiwalled Carbon Nanotube Nanocomposite for Supercapacitor Applications

Electrochemical Performance of CNTs/RGO/MnO2 Composite Material for Supercapacitor

Manganese hexacyanoferrate/multi-walled carbon nanotubes nanocomposite: Facile synthesis, characterization and application to high performance supercapacitors

Engineering of MnO<sub>2</sub>-based nanocomposites for high-performance supercapacitors

Hydrothermal Synthesis of MnO2/CNT Nanocomposite with a CNT Core/porous MnO2 Sheath Hierarchy Architecture for Supercapacitors

Role of Carbon Nanomaterials on Enhancing the Supercapacitive Performance of Manganese Oxide-Based Composite Electrodes

Carbon Cloth@t-Nb2o5@mno2: A Rational Exploration of Manganese Oxide for High Performance Supercapacitor

Electrochemical properties of MnO2/activated carbon nanotube composite as an electrode material for supercapacitor

Engineering of MnO2-based Nanocomposites for High-Performance Supercapacitors

Hierarchical Manganese Oxide/Carbon Nanocomposites for Supercapacitor Electrodes

Monolayer Standing MnO2-Nanosheet Covered Mn3O4 Octahedrons Anchored in 3D N-Doped Graphene Networks As Supercapacitor Electrodes with Remarkable Cycling Stability

MnO2/Carbon Composites for Supercapacitor: Synthesis and Electrochemical Performance

Synthesis and Electrochemical Characterizations of Amorphous Manganese Oxide and Single Walled Carbon Nanotube Composites As Supercapacitor Electrode Materials

MnO2–TiO2/C Nanocomposite Arrays for High-Performance Supercapacitor Electrodes

Hierarchical assembly of manganese dioxide nanosheets on one-dimensional titanium nitride nanofibers for high-performance supercapacitors