Abstract:MnO 2 is an attractive material owing to its high specific capacitance, excellent electrochemical activity, thermal and chemical stability, environmental benignity and broad potential window. However, its poor electrical conductivity limits its performance in supercapacitor applications. The electrical conductivity of MnO 2 can be enhanced by making its composites with carbon nanomaterials as these offer superior electrical conductivity and high specific surface area. The present study is a comparative study on the effect of various types of carbon nanomaterials such as carbon nanotubes (CNTs), graphene oxide, thermally reduced graphene oxide, activated carbon and carbon nanofibers on the supercapacitive performance MnO 2 electrodes by making composite electrodes. MnO 2 was synthesized by a facile chemical reduction method, and calcination was performed at 200 °C to obtain amorphous state. MnO 2 -based composite electrodes were prepared using 10 wt.% of various carbon nanomaterials. Characterization of different carbon materials was carried out by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and atomic force microscopy. Composite electrodes were prepared by coating mixture, consisting of MnO 2 , carbon nanomaterials, carbon black and polyvinylidene fluoride on the surface of highly porous Ni foam using a high-speed vacuum planetary centrifugal mixer. Electrochemical characterization of the prepared electrodes was performed by cyclic voltammetry, galvanostatic charge discharge (GCD) and electrochemical impedance spectroscopy (EIS). GCD revealed that MnO 2 -CNTs composite electrodes showed maximum specific capacitance (SC) of 330 F/g at 1 A/g current density and areal capacitance of 3.16 F/cm 2 with 5–7 mg mass loading of active material in 3 M KOH as an aqueous electrolyte. This SC was ca. 79% higher than pure MnO 2 and also higher than previously reported MnO 2 /CNTs composite electrodes. MnO 2 -CNTs symmetric supercapacitor device showed excellent SC of 177 F/g at 1 A/g current density with 94% charge retention after 1000 GCD cycles. EIS analysis showed that MnO 2 -CNTs composite electrode had the lowest charge transfer resistance compared to other electrodes.

Synthesis and Electrochemical Performance of MnO2/CNTs–embedded Carbon Nanofibers Nanocomposites for Supercapacitors

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Coaxial Carbon Nanofibers/mno2 Nanocomposites As Freestanding Electrodes for High-Performance Electrochemical Capacitors

Synthesis of MnO2/N-doped Ultramicroporous Carbon Nanospheres for High-Performance Supercapacitor Electrodes

Manganese hexacyanoferrate/multi-walled carbon nanotubes nanocomposite: Facile synthesis, characterization and application to high performance supercapacitors

Incorporation of nanostructured manganese dioxide into carbon nanofibers and its electrochemical performance

Enhanced Electrochemical Performance of Mn3O4/Multiwalled Carbon Nanotube Nanocomposite for Supercapacitor Applications

Construction and electrochemical properties of carbon nanotube composite Mn-MOFs materials electrode for high-performance flexible supercapacitors

A Facile Synthesis of Cu-MnO/CNF by Electrospinning Method and Its Electrochemical Performance for Supercapacitor Application

MnO 2 /Porous Carbon Nanotube/MnO 2 Nanocomposites for High-Performance Supercapacitor

Electrochemical properties of MnO2/activated carbon nanotube composite as an electrode material for supercapacitor

Electrochemical Performance of CNTs/RGO/MnO2 Composite Material for Supercapacitor

Facile Synthesis of NiCo2S4/CNTs Nanocomposites for High-Performance Supercapacitors.

MnO2‐Infused PAN Carbon Nanofibers Synthesized via Electrospinning for Enhanced Supercapacitor Performance

Role of Carbon Nanomaterials on Enhancing the Supercapacitive Performance of Manganese Oxide-Based Composite Electrodes

High-performance MnO2@MXene/carbon nanotube fiber electrodes with internal and external construction for supercapacitors

Synthesis and Characterization of Ni/CNTs Electrodes and Their Supercapacitors Performance

Carbon nanotubes and manganese oxide hybrid nanostructures as high performance fiber supercapacitors

Factors influencing MnO2/multi-walled carbon nanotubes composite's electrochemical performance as supercapacitor electrode

Carbon nanosheets/MnO2/NiCo2O4 ternary composite for supercapacitor electrodes

MnO2 Nanowires-Decorated Carbon Fiber Cloth As Electrodes for Aqueous Asymmetric Supercapacitor