Abstract:During five-axis cutting, the unreasonable selection of the tool’s diameter and processing width will greatly affect processing efficiency. However, the existing tool’s diameter and processing width values avoid local over-cutting, which is conservative. Therefore, a calculation method of optimal cutting diameter and processing width based on machining interference surface with flat-end cutter as the research object is proposed in this paper. First, the offset surface of discrete points is constructed as the machining interference surface based on the implicit surface theory. The surface offset is the maximum allowable machining error. Then, according to the Dupin indicatrix line between the tool and the machining surface, sufficient and necessary conditions for the local malleability of the flat-end cutter are obtained. Based on the constructed machining interference surface, the optimal diameter of the tool is calculated via the effective cutting profile curve of the tool at the interference surface. Next, the next cutter contact point is obtained by intersecting the tangent line between the cutter contact point and the upper or lower limit surface of the machining interference surface and the cutting path curve. The processing width is calculated according to the distance between the two adjacent cutter contact points. Finally, the proposed algorithm is verified by CAM software simulation and experiments by taking a complex surface as an example. The experimental results show that the optimization algorithm of the tool’s diameter and bandwidth under the constraint of machining interference surface can shorten the machining time and obtain higher machining efficiency in the NC machining of complex surfaces.

The Key Technical Research in Interference-Free Tool Path of Torus Cutter

Collisionless Tool Orientation Smoothing above Blade Stream Surface Using NURBS Envelope

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

Global Uncut Regions Removal for Efficient Contour-Parallel Milling

Research on tool diameter and processing width optimization for highly efficient machining of complex surfaces constrained by machining interference surface

Non-retraction toolpath generation for irregular compound freeform surfaces with the LKH TSP solver

An Optimisation Algorithm for Reducing the Number of Turns on Space-Filling Curve Toolpath for Sculptured Surface Milling

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Tool-path direct interpolation for surfaces intersection machining in CNC system

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Time-Efficient Trochoidal Tool Path Generation for Milling Arbitrary Curved Slots

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Oriented Bounding Box and Octree Based Interference Detection Simplified Algorithm of Free-form Surfaces Machining

Optimization Algorithm about Pretreatment of Discrete Tool Path Track Based on Accumulated Curvature

Collision-free Tool Motion Planning for 5-Axis CNC Machining with Toroidal Cutters