Abstract:<p>A circumferential crack in the fusion line is a major threat to the structural integrity of the pipeline girth weld because it may possibly lead to fracture failure when subjected to large plastic deformations. For the newly constructed X80 pipeline with an outside diameter (OD) of 1422 mm in China, the complicated configuration of welded joints and the outer diameter are outside the range of the general fracture assessment standards, such as BS 7910. Furthermore, during the pipe manufacture process, pipeline designers merely specify the minimum yield strength limit according to the pipe steel grade. This results in a wide variation range in the choice of yield strength values of the base metal. This also leads to a serious problem in the fracture assessment of pipe girth weld because the weld strength is commonly considered to be either evenly matched or overmatched. The foregoing factors make it difficult to perform an accurate fracture assessment using conventional standards. This study therefore aims to investigate the fracture behavior of 1422-mm OD pipelines with a double-V groove weld and circumferential crack in the fusion line. The specific effect of material mismatch and the realistic operational parameters that influence the fracture capacity of the pipe are examined via a series of numerical investigations. First, a rigorous three-dimensional finite element model to simulate the pipe girth weld is established by utilizing the ABAQUS finite element code package. The weld, which has a canoe-shaped surface crack in the fusion line between the heat-affected zone and root welding metal, is subjected to biaxial loading conditions. The keyhole method is adopted to simulate the crack front as well as the crack tip to eliminate the stress singularity effect during deformation. A refined mesh strategy is introduced to ensure the accurate simulation of the stress and strain fields in the vicinity of the crack tip. Based on the numerical model, the J-integral fracture parameter, which is clearly defined based on a strict mechanical theory, is chosen to characterize the effect of strength matching ratio, internal pressure, and yield to tensile strength ratio on the crack driving force. A new strain-based J-integral prediction formula is proposed based on numerical results.</p>

Strength Match and Safety Evaluation of High Grade Pipeline Steel Circumferential Weld

Safety Test Research of Pressure Pipes Containing Incomplete Welding Defects

Finite Element Analysis of the Effect of Strength Match on Ductile Fracture Welded Pipe

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Mismatch effect on safety assessment of pressure pipe with incomplete penetration defect

Study on safety evaluation method of incomplete penetration welded pipeline under combined loads of internal pressure and bending moment

Effect of Strength Mismatch on Ductile Fracture Behavior of Welding Pipe

Fracture behavior analysis of X80 pipelines welded joints with unequal wall thickness

A Review of Ductile Fracture and Welding Research on High Pressure Gas Transmission Pipeline Steels

Mechanical behaviour of longitudinal lap-welded joints of high strength steel: Experimental and numerical analysis

Inhomogeneous Strain Behaviors of the High Strength Pipeline Girth Weld under Longitudinal Loading

Safety assessment of incomplete penetration defects at the root of girth welds in pipelines

Effect of welding axial stresses on the strength of a welded pipe joint with a defect

Investigation of the tensile strain response of the girth weld of high-strength steel pipeline

Study on fracture mechanics parameters of surface crack in overmatched weldments

Fracture response of 1422-mm diameter pipe with double-V groove weld joints and circumferential crack in fusion line

Effect of Strength Mismatch on Limit Load of Dissimilar Metal Welded Joint for Connecting Pipe-Nozzle of Nuclear Pressure Vessel

Study on Fracture Behavior and Toughening Mechanisms of Ultra-High-Strength Pipeline Steel

Strength Mismatch Effect on Residual Stress of High Strength Steel Butt-Welded Joints

Safety Evaluation and Defect Analysis on Oil Pipeline

Failure Analysis and Fitness-for-service Assessment for a Pipeline