Abstract:How processing solvents influence the overall photovoltaic performances of polymer solar cells (PSCs) remains unclear in various recently emerged new material systems. Here we systematically studied this issue by integrating an extensively used poly (3-hexylthiophene) (P3HT), or a recently developed conjugated polymer P2F-EHp, with different non-fullerene acceptors. The P3HT based devices processed with the non-halogenated solvent, 2-methylanisole in presence of 1-methylnaphthalene as solvent additive, exhibit reduced bimolecular and trap-assisted monomolecular recombination, facile charge extraction and enhanced charge carrier mobilities. Morphological investigation reveals that the optimizing crystallites, phase purity as well as nanofibrous structure is effective to the enhancement of charge generation and transport. Note that P3HT:O-IDTBR based devices processed with these non-halogenated solvents exhibit an impressive power conversion efficiency of 7.1% with a high fill factor of 75.09% on a device area of 0.05 cm2, and the efficiency remained 6.89% even in a device with large active layer area of 1 cm2 with promising thermal stability. It is also noted that efficient PSCs consisting of P2F-EHp and non-fullerene acceptors of IT-4F and IT-4Cl were developed via optimizing non-halogenated toluene:o-xylene co-solvent. The detailed investigation of film morphology demonstrated that the co-solvent appeared to assist the manipulation of crystal coherent lengths and effectively decrease the phase separation of the corresponding blend films. Of particular importance is that this material system is compatible with the low-cost blade-coating technique and can be processed under ambient conditions without post-treatment. A remarkable power conversion efficiency of 10.1% was achieved by blade-coating the P2F-EHp:IT-4F:IT-4Cl blends in air. The results indicated that using non-halogenated solvents is a promising candidate for constructing efficient PSCs toward practical applications.

Effect of Variation in Environmental Pressure of Solvent Annealing on the Performance of Polymer Solar Cells

Dark and illuminated J(V) characteristics of thin layered bulk heterojunction P3HT:PCBM sandwich solar cells after thermal treatment

Inverted All-Polymer Solar Cells Based on a Quinoxaline–thiophene/naphthalene-Diimide Polymer Blend Improved by Annealing

Highly Efficient Solar Cells Based on the Copolymer of Benzodithiophene and Thienopyrroledione with Solvent Annealing

Annealed Treatment Effect in Poly(3-hexylthiophene):Methanofullerene Solar Cells

Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing

Post-Fabrication Annealing Effects in Polymer-Nanotube Photovoltaic Cells

Annealing Effects on the Photovoltaic Performance of All-Conjugated Poly(3-Alkylthiophene) Diblock Copolymer-Based Bulk Heterojunction Solar Cells

Effect of Two-Step Annealing on the Performance of Ternary Polymer Solar Cells Based on P3ht:Pc71bm:Sq

Pressure-Dependent Relaxation Dynamics of Excitons in Conjugated Polymer Film

Improving performance of polymer photovoltaic devices using an annealing-free approach via construction of ordered aggregates in solution

Effects of Optical Interference and Annealing on the Performance of Poly (3-Hexylthiophene): Fullerene Based Solar Cells

Effect of Device Fabrication Conditions on Photovoltaic Performance of Polymer Solar Cells Based on Poly(3-Hexylthiophene) and Indene-C70 Bisadduct

Influence of thermal annealing on microstructure, energetic landscape and device performance of P3HT: PCBM-based organic solar cells

Enhanced Performance of P3HT-based Non-Fullerene Polymer Solar Cells by Optimizing Film Morphology Using Non-Halogenated Solvent

Effects of Solvent Vapour Annealing on the Performances of Benzo[1,2-B:4,5-B′]dithiophene and 4,7-Di(4-hexyl-thiophen-2-yl)-5,6-difluorine-2,1,3-benzothiadiazole-based Alternating Polymer Solar Cells with Different Configurations

Influence of the Solvent on the Performance of the Bulk Heterojuction Solar Cells

Effect of Thermal Annealing on the Efficiency of Heterojunction Photovoltaic Cells Fabricated Using Poly(3-Hexylthiophene) and Methanofullerene, [6,6]-Phenyl C61-butyric Acid Methyl Ester.

Nanoscale Structural and Electronic Evolution for Increased Efficiency in Polymer Solar Cells Monitored by Electric Scanning Probe Microscopy

Improving Efficiency of Non-Fullerene Polymer Solar Cells by Using Non-Halogenated Solvents

Decreased Domain Size and Improved Crystallinity by Adjusting Solvent–polymer Interaction Parameters in All‐polymer Solar Cells