Abstract:An accurate determination of the contact pressure and local sliding in a cold rolling process is an essential step towards the prediction of the roller’s life due to wear damage. This investigation utilized finite element analysis to quantify the local contact pressure and local sliding over the rolling bite in a plate cold rolling process. It was the first study to quantify the local sliding distance in a rolling process using the Finite Element Analysis (FEA). The numerical results indicate that the local contact pressure over the rolling bite demonstrates a hill profile, and the peak coincides with the neutral plane. The local sliding distance over the rolling bite demonstrates a double-peak profile with the two peaks appearing at the forward slip and backward slip zones respectively. The amplitude of sliding distance in the backward slip zone is larger than that in the forward slip zone. A stick zone was confirmed between the forward slip and backward slip zones. According to a parametric study, the local contact pressure and sliding distance decrease when the thickness reduction is reduced or the diameter of the roller is decreased. The location of the neutral plane always presents at the rolling exit side of the rolling bite’s center. The size of the stick zone enlarges and the sizes of slip zones shrink significantly when the friction coefficient is increased. Finally, a novel concept of wear intensity was defined to examine the wear of the roller based on the local contact pressure and local sliding distance. The results show that a two-peak wear response exists in the backward and forward slip zones. The magnitude of the wear in the backward slip zone is larger than that in the forward slip zone. For a given roller and blank material combination, using a smaller thickness reduction, a smaller diameter roller and a higher friction coefficient condition can reduce the wear of the roller for a single rolling cycle. The current paper develops an understanding of rolling contact responses to the wear of the roller in rolling process. The research method can also be applied to study other rolling or sliding wear problems.

Material Wear Numerical Simulation Experimental Study

Research Status of Wear Numerical Simulation Technology

Numerical Simulation Technique of Materials Wear Failure and Its Prospect

Frictional Study on 30CrNi2MoVA Steel Based on Experiments and Finite Element Simulation: Wear Prediction

Numerical Analysis of Time-Varying Wear with Elastic Deformation in Line Contact

Numerical Prediction of Wear in SAG Mills Based on DEM Simulations

Numerical simulation on high-speed and heavy-load wear behavior of CoCrNi and CoCrFeMnNi alloys

Numerical Analysis of Elastic Wear in Line Contact

A Numerical Study on Contact Condition and Wear of Roller in Cold Rolling

Correlating numerical modelling with experimental studies to quantify the wear resistance of high-carbon chromium bearing steel in mixed lubrication

Numerical simulation of wear-mechanism maps

Study on Simulation of Coupled Heat Transfer, Stress and Wear Behavior in Pin-on-disc Experiments

Numerical Analysis of Wear Coupling with Dynamics Behavior of Machine

Research progress in the application of molecular dynamics simulation in the frictional wear of materials

A Numerical Method to Investigate the Effect of Thermal and Plastic Behaviors on the Evolution of Sliding Wear

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

The Numerical Analysis and Experimental Investigation for Two Dimensional Nonlinear Wear Characteristics of the Cylinder Liner

Efficient Wear Simulation Methodology for Predicting Nonlinear Wear Behavior of Tools in Sheet Metal Forming

A Numerical Simulation Method for Ploughing Effect of Three-body Abrasion

Study on Simulation of Multifield Coupled Wear in Reciprocating Electrical Contact

Numerical Simulation of Plastic Deformation Wear Rate of Materials under Three-Body Abrasion