Abstract:This paper delves into the effects of a toroidal propeller's geometrical characteristics on its thrust and efficiency. The focus is on three distinct numerical distributions: the outward inclination angle, the pitch angle, and the number of blades. The Reynolds-Averaged Navier–Stokes (RANS) method is employed to analyze the propeller's open-water performance, taking into account cavitation flow, and a test bed was constructed to verify the rationality of CFD simulation. The findings reveal that the toroidal propeller's efficiency and thrust coefficient initially increase with the outward inclination angle, followed by a decline; the angle of maximum efficiency is identified at 23.25°. A reduction in the pitch angle leads to a temporary rise in efficiency, which subsequently falls, accompanied by a continuous decrease in the thrust coefficient. The optimal selection angle should consider this to prevent negative thrust at lower advance coefficients, which could further impact overall efficiency. An increased number of blades elevates the thrust coefficient and reduces the force on each blade, yet has a minimal effect on efficiency. Additionally, the orthogonal test method was utilized to explore the interactions between these three parameters. The outcomes indicate that, in terms of final power, there is no significant interaction among the three parameters under investigation. However, notable interactions are observed between the pitch angle and the number of blades, the outward inclination angle and the pitch angle, and the outward inclination angle and the number of blades. Consequently, the study's findings facilitate the selection of parameter combinations that yield higher efficiency or thrust coefficients.

The Effect of Stator Parameters on Performance of Ducted Propeller with Pre-swirl Stators

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Numerical study of the hydrodynamic performances of surface piercing propeller

Numerical Investigation on Hydrodynamic Performance of a Ducted Propeller for Vectored Underwater Robot

Effect of pre-swirl stator angles on broadband noise considering hydrodynamic performance of pump-jet propeller

Numerical simulation of vortex instabilities in the wake of a preswirl pumpjet propulsor

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Effects of the stator prewhirl angle on the unsteady force under uniform and turbulent inflow for a pump-jet propulsor: a numerical study

Numerical Simulation of Effect of Swirling Chamber Structure on Performance and Flow in Vortex Diode

Analysis of Stern Shape Effect on Pre-Duct Propeller Performance Based on Numerical Simulation

The design and energy saving effect of partial duct and unconventional pre-swirl fin and their combination system

A Study on the Effect of Toroidal Propeller Parameters on Efficiency and Thrust

Numerical Simulation of Unsteady Flow Around Propeller Based on CFD Technology

Parameterized design method and verification of propeller single-passage domain

Hydrodynamic Design of an Advanced Submerged Propulsion

Sources and mechanisms of flow loss and hydroacoustics in a pre-swirl stator pump-jet propulsor

Numerical simulation of KVLCC2 self-propulsion with ducted propeller in head waves

Numerical prediction of ducted propeller performance based on a BEM–RANS coupling method

Numerical Study on the Stall Behavior of a Water Jet Mixed-Flow Pump

Analysis on the effect of variable guide vane numbers on the performance of pump as turbine