Abstract:The pump-jet propulsor consists of a duct, a rotor and stators which are installed upstream of the rotor to provide pre-swirl flow or downstream of rotor to absorb the kinetic energy in the flow. The strong interactions between the three components and the vehicle are closely related to their design and exert great effect on noise and hydrodynamic performance. This paper attempts to develop an effective and efficient method for the optimal design of the duct and the pre-swirl stators under the influence of vehicle and rotor via viscous flow CFD simulations. In this paper, the two key parameters, attack angle of the duct and pitch angle of pre-swirl stators, are investigated. The numerical simulations are based on the solution of the Reynolds-Averaged Navier-Stokes (RANS) equations using a two-layer realizable k-ε model for turbulence closure. The computational domain is discretized into mixed unstructured cells. The software package STAR-CCM+ is used for both grid generations and flow simulations. The rotor is replaced by the body-force model which is proposed according to the load distribution of the rotor in pump-jet propulsor. Total thrust of body force balances the resistance of a fully-appended underwater vehicle and its propulsor in the self-propulsion simulations and torque is determined by assuming that the propulsive efficiency is 80%. To the end of the optimal design, the total resistance, as the main consideration, and detailed flow field, such as pressure distribution, are numerically investigated for varied attack angles of the duct and pitch angles of pre-swirl stator. It is shown that the two parameters have significant impact on the performance of the propulsor and the recommended design is given.

Hydrodynamic Design of an Advanced Submerged Propulsion

Numerical study of the hydrodynamic performances of surface piercing propeller

Numerical Design Study of Duct and Stator for a Pump-Jet Propulsor

Design Method of Water Jet Pump Towards High Cavitation Performances

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Numerical Investigation on Hydrodynamic Performance of a Ducted Propeller for Vectored Underwater Robot

Design of Contra-Rotating Waterjet Pump Based on High Cavitation Performances

Numerical and Experimental Analysis of A Ducted Propeller Designed by A Fully Automated Optimization Process under Open Water Condition

Cavitating Flow Analysis and Design Optimization for a Waterjet Mixed Flow Pump

Numerical Analysis of the Hydrodynamic Performance Impact of Novel Appendage on Rim-driven Thruster

Numerical Investigation of Hydrodynamic Characteristics of a Rim-Driven Thruster Coupled with an Underwater Vehicle

Hydrodynamic Shape Optimization of an Autonomous Underwater Vehicle with an Integrated Lifting Line and Viscous Continuous Adjoint Approach

The Hydrodynamic Analysis of Propeller Based on ANSYS-CFX

Design Optimization Of A Mixed Flow Waterjet Pump For Performance Improvement Involving Cavitation

Numerical Investigation of Tip Geometry on the Tip-clearance Flow Features of a Pump-jet Propulsor

Research on automatic optimization of ducted propeller design based on CFD techniques

Numerical simulation of KVLCC2 self-propulsion with ducted propeller in head waves

Aero-Mechanical Multidisciplinary Optimization and Knowledge Discovery of High Pressure Ratio Centrifugal Impeller

Propulsion Performance of Flapping Hydrofoil by Using Discrete Vortex Method

PROPULSION THRUST FORCE CALCULATION WITH CAVITATION FOR AN UNDERWATER VEHICLE

Cavitation Suppression and Design Optimization in a Cryogenic Liquid Turbine Expander Based on Thermodynamic Cavitation and Entropy Production Analysis