A Catalytic Oxygen Sensor Based on the Hydrogen- Oxygen Reaction Heat

谭峰,关亚风,杨丙成,陈令新,马继平

DOI: https://doi.org/10.3969/j.issn.1004-4957.2004.01.027

2004-01-01

Abstract:A newtype of catalytic oxygen sensor has been constructed,based on the measurement of the heat of the hydrogen-oxygen reaction.The sensor,consisting of thin-film Pt thermal sensing resistors and the MnOx/Pd catalyst,was incorporated into a reaction cell and constituted a Wheatstone bridge cirˉcuit together with a reference cell and counter resistors in an isothermal oven.The reaction heat liberated in the hydrogen-oxygen reaction increased the resistance ofthe Ptresistor in the reaction cell,so the resisˉtance deviation in the bridge produced an output signal.Since the gas mixture flows directly through the reaction cell,the oxygen in the mixture can be completely depleted in the micro reaction cell.Thus,the micro cell has a high utilization efficiency of oxygen to be detected.Parameters that affect the detection sensitivityof oxygen,such as reaction temperature,oxygen flowrate,amount of hydrogen,and bridge voltˉage,were investigated.The reference cell and the isothermal oven were employed to reduce the impacts of environmental temperature and humidity fluctuations.The sensor shows a good linear relationship with oxyˉgen concentration in the range of1～1200×10 -6 (w).The detection limit is1×10 -6 (w).The90%response time of the sensor is less than5seconds.The developed sensor has the advantages of simple structure,fast response speed,excellent signal stability and high sensitivity.