Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Ultra-Low-Power, Extremely Stable, Highly Linear-Response Thermal Conductivity Sensor Based on a Suspended Device with Single Bare Pt Nanowire

A Reliable and Fast Hydrogen Gas Leakage Detector Based on Irreversible Cracking of Decorated Palladium Nanolayer Upon Aligned Polymer Fibers

Self-Heated Hydrogen Gas Sensors Based on Pt-Coated W18o49 Nanowire Networks with High Sensitivity, Good Selectivity and Low Power Consumption

Highly Sensitive Hydrogen Sensor Based on a New Suspended Structure of Cross-Stacked Multiwall Carbon Nanotube Sheet

An easy-fabricated hydrogen gas sensor based on palladium-decorated polyurethane nanofibers

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Pd Nanoislands-Modified ZnO Nanowire-Network for Sensitive and Linear Hydrogen Sensing

Hydrogen Sensor Based on NTC Thermistor with Pt-Loaded WO<sub>3</sub>/SiO<sub>2</sub> Coating

A Temperature-Stable Pd Nanofilm Hydrogen Sensor with a Wheatstone Bridge Structure

Flexible nanofiber sensor for low concentration hydrogen detecting.

Hydrogen Sensor Based on NTC Thermistor with Pt-Loaded WO3/SiO2 Coating

Pt/SnO2-Pd Nanoelectrode Applied for Hydrogen Sensor with Zero-Power Consumption and Low Detection Limit

The Detection of Hydrogen with A Nanotube Structured Sensor

Long-term reliable wireless H2 gas sensor via repeatable thermal refreshing of palladium nanowire

Palladium/Bismuth Nanowires with Rough Surface for Stable Hydrogen Sensing at Low Temperatures

Interconnected Pd Nanoparticles Supported on Zeolite-AFI for Hydrogen Detection under Ultralow Temperature

Highly Sensitive and Selective H2S Sensors with Ultra-Low Power Consumption Based on Flexible Printed Carbon-Nanotube-Thin-Film-Transistors

(3-Aminopropyl) triethoxysilane-based immobilization of Pt/WO 3 on a microfiber sensor for high sensitivity hydrogen sensing

High-performance Palladium Nanotube Network As Fast, High-Resolution, and Wide Range Hydrogen Detector in Atmosphere

A low-temperature hydrogen sensor based on an acoustic topological material

(3-Aminopropyl) triethoxysilane-based immobilization of Pt/WO3 on a microfiber sensor for high sensitivity hydrogen sensing