Abstract:This research presents a novel electrochemical approach for the selective measurement of hydrogen peroxide and organic hydroperoxides, which is pivotal in many fields. The study details the development of an advanced sensor using a one-pot, one-step synthesis to embed platinum nanoparticles within a 3D-polymeric matrix of poly (brilliant green) on screen-printed carbon electrodes. The modified surfaces were characterized using scanning and transmission electron microscopy, Raman spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The results obtained by amperometry showed that, at 0.1 V, only H2O2 produced an electrochemical signal, while, at higher potential (0.5 V), all the hydroperoxides tested exhibited an electrochemical signal. Sensitivities obtained for H2O2 by flow injection analysis were 431 ± 3 and 465 ± 4 μC mM-1 at 0.1 and 0.5 V, respectively, with detection limits (S/N = 3) 116 and 30 nM, respectively. For organic hydroperoxides, sensitivities ranged from 22.3 to 32.6 μC mM-1 at 0.5 V, and limits of detection from 1.15 to 5.95 μM. Chemometric analysis indicated the sensor can satisfactorily measure H2O2 in the presence of the organic hydroperoxides herein analysed. The proposed sensor showed excellent properties in terms of repeatability, reproducibility and stability, with minimal interference. The reliability of the sensor was verified by measuring hydroperoxides spiked in aqueous extracts from real air quality monitoring filters. These features highlight the suitability of the sensor for hydroperoxide measurement and underscore its reliability as a practical tool for real-world applications.

Fully-reversible optical sensor for hydrogen peroxide with fast response.

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

A Highly Sensitive and Reproducible Fluorescence Sensor for Continuously Measuring Hydrogen Peroxide at the Sub-Ppm Level.

Highly sensitive and reproducible fluorescence sensor for continuously measuring hydrogen peroxide at sub-ppm level

Low‐Potential Sensitive Hydrogen Peroxide Detection Based on Nanotubular TiO2 and Platinum Composite Electrode

Hydrogen Peroxide Detection by Super-Porous Hybrid CuO/Pt NP Platform: Improved Sensitivity and Selectivity

A Nonenzymatic Hydrogen Peroxide Sensor Based on Pt/PPy Hollow Hybrid Microspheres

A perovskite-type KNbO3 nanoneedles based biosensor for direct electrochemistry of hydrogen peroxide

Selective and highly sensitive measurement of H2O2 and organic hydroperoxides with PtNP/Poly(Brilliant Green)/SPCE

High-Linearity Hydrogen Peroxide Sensor Based on Nanoporous Gold Electrode

Renewable reagentless hydrogen peroxide sensor based on direct electron transfer of horseradish peroxidase immobilized on colloidal gold-modified electrode.

Hydrogen Peroxide Electrochemical Detection for the Development of Protein Film-Modified Sensor

Dendritic Silver/Silicon Dioxide Nanocomposite Modified Electrodes for Electrochemical Sensing of Hydrogen Peroxide

Ultrasensitive Nonenzymatic Real-Time Hydrogen Peroxide Monitoring Using Gold Nanoparticle-Decorated Titanium Dioxide Nanotube Electrodes

Laser‐induced Graphene‐based Non‐enzymatic Sensor for Detection of Hydrogen Peroxide

A Novel Hydrogen Peroxide Sensor via the Direct Electrochemistry of Horseradish Peroxidase Immobilized on Colloidal Gold Modified Screen-printed Electrode

A Non-Disposable Electrochemical Sensor Based on Laser-Synthesized Pd/LIG Nanocomposite-Modified Screen-Printed Electrodes for the Detection of H2O2

Hydrogen Peroxide Sensor Based On Carbon Nanotubes/Beta-Ni(Oh)(2) Nanocomposites

Copper Oxide Nanoparticles and Ionic Liquid Modified Carbon Electrode for the Non-Enzymatic Electrochemical Sensing of Hydrogen Peroxide

Ultrasensitive Detection of Hydrogen Peroxide Using Bi 2 Te 3 Electrochemical Sensors

Pd Nanoparticle-Modified Electrodes for Nonenzymatic Hydrogen Peroxide Detection