Abstract:Nowadays, pumps of different size are needed for a great variety of purposes. In the past, both computational fluid dynamics (CFD) and experimental flow visualization were performed to reveal flow characteristics within centrifugal pumps, to examine a specific design and to guide design improvement (see Burgreen et al. 1996, 2000). Li et al. (2007) studied the interior viscous flow in a mini pump with an asymmetric axis using CFD and PIV (particle image velocimetry) for improvement of the pump design. Matsui et al. (2002) adopted the the k-ω model in the CFD simulation for a centrfugal pump, and the computational grid system only consisted of one flow passage for LDV (laser Dopler velocimetry) test impeller. Byskov et al. (2003a) and Pedersen & Larsen (2003 b) investigated the flow inside the rotating passages of a six-bladed shrouded centrifugal pump impeller using LES simulation and PIV and LDV measurements. The velocities predicted with LES were in good agreement with the experimental data. The two RANS simulations were, however, not able to predict this complex flow field. It was thus found that using LES for analyzing the flow field in centrifugal pumps could shed light on basic fluid dynamic with a satisfactory accuracy compared to experiments. A transient simulation was used to study the effects of pulsatile blood flow due to the heartbeat through blood pumps by Song et al. (2003). The microsized geometry of the pump made the choice of turbulence models significant for the accuracy of calculation. The comparison showed that the k-ω model gave better predictions of the shear level within the near wall regions than the k-e model. Guleren and Pinarbasi (2004) indicated that the stallcell size extended from one to two diffuser passages. Comparisons of the computational results with experimental data were made and showed good agreement. The unsteady flow in a low specific speed radial diffuser was simulated by the CFD code CFX-10 by Feng et al. (2009). The PIV and LDV measurements had been conducted to validate the CFD results. Both the phase-averaged velocity fields and the turbulence fields obtained from different methods are presented and compared. In this study, in order to get more information about the internal flow of a centrifugal pump, both experimental measurement and numerical simulation are engaged. A centrifugal model pump test rig is built for PIV measurement. The test, involving the technology of index match and fluorescent, is for acquiring flow pattern in a fixed rotational speed, the velocity distribution of the flow field are thus obtained. And, the RANS (Reynolds

Numerical Investigations on Flow Characteristics of Micro-Centrifugal Blood Pump

Experimental Investigation and Numerical Simulation of the Hydraulic Performance of a Centrifugal Blood Pump

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Numerical Simulation and Comparative Analysis of Flow Field in Axial Blood Pumps

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Numerical Simulation of Hemolysis in a Micro Axial Flow Blood Pump

Numerical Simulation on the Steady and Unsteady Internal Flows of a Centrifugal Pump

Applications of CFD Technique in the Design and Flow Analysis of Implantable Axial Flow Blood Pump

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

Numerical Simulation for Hydrodynamics and Biocompatibility in an Axial Blood Pump

Numerical Simulation Investigation on Flow Field of Axial Blood Pump

Numerical Simulation and Analysis of Solid-Liquid Two-Phase Flow in Centrifugal Pump

Numerical Simulation and Experimental Research on Passive Hydrodynamic Bearing in a Blood Pump

PIV Investigation on the Flow in a Model Centrifugal Blood Pump

Numerical Simulation and Experimental Study on Flow Field in an Axial Flow Pump

Design Optimization Of Flow Channel And Performance Analysis For A New-Type Centrifugal Blood Pump

Numerical Simulation of Three-dimensional Flow in Centrifugal Pump and Performance Prediction Based on CFD

Numerical Simulation of 3d Solid-Liquid Turbulent Flow in A Low Specific Speed Centrifugal Pump: Flow Field Analysis

Design Improvement for Interventional Blood Pumps Based on Flow Analysis

[Numerical study of the effect of geometrical parameters of straight impellers on the flow and hemolysis performance of centrifugal blood pumps]

Investigation of hemocompatibility and vortical structures for a centrifugal blood pump based on large eddy simulation