Abstract:Purpose The design and optimization of centrifugal blood pumps are crucial for improved extracorporeal membrane oxygenation system performance. Secondary flow passages are common in centrifugal blood pumps, allowing for a high volume of unstable flow. Traditional design theory offers minimal guidance on the design and optimization of centrifugal blood pumps, so it's critical to understand how design parameter variables affect hydraulic performance and hemocompatibility. Methods Computational fluid dynamics (CFD) was employed to investigate the effects of blade number, blade wrap angle, blade thickness, and splitters on pressure head, hemolysis, and platelet activation state. Eulerian and Lagrangian features were used to analyze the flow fields and hemocompatibility metrics such as scalar shear stress, velocity distribution, and their correlation. Results The equalization of frictional and flow losses allow impellers with more blades and smaller wrap angles to have higher pressure heads, whereas the trade-off between the volume of high scalar shear stress and exposure time allows impellers with fewer blades and larger blade wrap angles to have a lower HI; there are configurations that increase the possibility of platelet activation for both number of blades and wrap angles. The hydraulic performance and hemocompatibility of centrifugal blood pumps are not affected by blade thickness. Compared to the main blades, splitters can improve the blood compatibility of a centrifugal blood pump with a small reduction in pressure head, but there is a trade-off between the length and location of the splitter that suppresses flow losses while reducing the velocity gradient. According to correlation analysis, pressure head, HI, and the volume of high shear stress were all substantially connected, and exposure time had a significant impact on HI. The platelet activation state was influenced by the average scalar shear stress and the volume of low velocity. Conclusion The findings reveal the impact of design variables on the performance of centrifugal blood pumps with secondary flow passages, as well as the relationship between hemocompatibility, hydraulic performance, and flow characteristics, and are useful for the design and optimization of this type of blood pump, as well as the prediction of clinical complications.

Investigation of hemocompatibility and vortical structures for a centrifugal blood pump based on large eddy simulation

Investigation of the influence of blade configuration on the hemodynamic performance and blood damage of the centrifugal blood pump

Impact of volute design features on hemodynamic performance and hemocompatibility of centrifugal blood pumps used in ECMO

The impact of rotor configurations on hemodynamic features, hemocompatibility and dynamic balance of the centrifugal blood pump: A numerical study

The simulation of multiphase flow field in ventricular assist device and analysis of hemolytic capability

Design Improvement for Interventional Blood Pumps Based on Flow Analysis

[Numerical study of the effect of geometrical parameters of straight impellers on the flow and hemolysis performance of centrifugal blood pumps]

Influence of Inlet Boundary Conditions on the Prediction of Flow Field and Hemolysis in Blood Pumps Using Large-Eddy Simulation

Applications of CFD Technique in the Design and Flow Analysis of Implantable Axial Flow Blood Pump

Numerical Simulation for Hydrodynamics and Biocompatibility in an Axial Blood Pump

A Novel Design of Spiral Groove Bearing in a Hydrodynamically Levitated Centrifugal Rotary Blood Pump.

Evaluation of the Hemolysis and Fluid Dynamics of a Ventricular Assist Device under the Pulsatile Flow Condition

Numerical Investigations on Flow Characteristics of Micro-Centrifugal Blood Pump

Blood Pump Design Variations and Their Influence on Hydraulic Performance and Indicators of Hemocompatibility

Experimental Investigation and Numerical Simulation of the Hydraulic Performance of a Centrifugal Blood Pump

Design and Hemocompatibility Analysis of a Double-Suction Injection Suspension Blood Pump Using Computational Fluid Dynamics Methods.

On the Optimization of a Centrifugal Maglev Blood Pump Through Design Variations

Experimental and Numerical Investigations of Head-Flow Curve Instability of A Single-Stage Centrifugal Pump with Volute Casing

Experimental Study of Cavitation Phenomenon in A Centrifugal Blood Pump Induced by the Failure of Inlet Cannula

Flow Evaluation and Hemolysis Analysis of BVAD Centrifugal Blood Pump by Computational Fluids Dynamics

Analysis of Flow Field and Hemolysis Index in Axial Flow Blood Pump by Computational Fluid Dynamics–discrete Element Method