Abstract:Ventricular assist devices or total artificial hearts can be used to save patients with heart failure when there are no donors available for heart transplantation. Blood pumps are integral parts of such devices, but traditional axial flow blood pumps have several shortcomings. In particular, they cause hemolysis and thrombosis due to the mechanical contact and wear of the bearings, and they cause blood stagnation due to the separation of the front and rear guide wheel hubs and the impeller hub. By contrast, the implantable axial flow, maglev blood pump has the characteristics of no mechanical contact, no lubrication, low temperature rise, low hemolysis, and less thrombosis. Extensive studies of axial flow, maglev blood pumps have shown that these pumps can function in laminar flow, transitional flow, and turbulent flow, and the working state and performance of such pumps are determined by their support mechanisms and flow channel. Computational fluid dynamics (CFD) is an effective tool for understanding the physical and mechanical characteristics of the blood pump by accurately and effectively revealing the internal flow field, pressure-flow curve, and shear force distribution of the blood pump. In this study, magnetic levitation supports were used to reduce damages to the blood and increase the service life of the blood pump, and a conical impeller hub was used to reduce the speed, volume, and power consumption of the blood pump, thereby facilitating implantation. CFD numerical simulation was then carried out to optimize the structural parameters of the conical axial maglev blood pump, predict the hemolysis performance of the blood pump, and match the flow channel and impeller structure. An extracorporeal circulation simulation platform was designed to test whether the hydraulic characteristics of the blood pump met the physiological requirements. The results showed that the total pressure distribution in the blood pump was reasonable after optimization, with a uniform pressure gradient, and the hemolysis performance was improved.

Hemolysis and Flow Field in New Streamlined Axial Blood Pump

Applications of CFD Technique in the Design and Flow Analysis of Implantable Axial Flow Blood Pump

Computational Fluid Dynamics Modeling and Hemolysis Analysis of Axial Blood Pumps with Various Impeller Structures

Design optimization of an axial blood pump with computational fluid dynamics.

DESIGN OF IMPLANTABLE AXIAL-FLOW BLOOD PUMP AND NUMERICAL STUDIES ON ITS PERFORMANCE

Study of CFD Simulation on Embedded Axial Blood Pump

CFD-Based Flow Channel Optimization and Performance Prediction for a Conical Axial Maglev Blood Pump

Analysis of Flow Field and Hemolysis Index in Axial Flow Blood Pump by Computational Fluid Dynamics–discrete Element Method

Numerical Simulation and Comparative Analysis of Flow Field in Axial Blood Pumps

Computational Fluid Dynamics-Based Hydraulic and Hemolytic Analyses of a Novel Left Ventricular Assist Blood Pump.

Research of CFD Simulative Optimization on Impeller Structure of Axial Blood Pump

Design Optimization Of Flow Channel And Performance Analysis For A New-Type Centrifugal Blood Pump

Numerical Simulation Investigation on Flow Field of Axial Blood Pump

Optimizing the design of axial flow pump blades based on fluid characteristics

A novel integrated rotor of axial blood flow pump designed with computational fluid dynamics.

Flow field CFD analysis of axial flow blood pump

Structural Improvement Study of Streamline Design Method, Conical Hub, and Auxiliary Blades for Axial Blood Pump.

Design Improvement for Interventional Blood Pumps Based on Flow Analysis

Flow Evaluation and Hemolysis Analysis of BVAD Centrifugal Blood Pump by Computational Fluids Dynamics

The simulation of multiphase flow field in ventricular assist device and analysis of hemolytic capability

Hydrodynamic and Hemolysis Analysis on Distance and Clearance Between Impeller and Diffuser of Axial Blood Pump