Abstract:Investigations in recent years showed that three-dimensional blade design using end bend,sweep and dihedral could reduce endwall loss,improve efficiency and stable operating range.STR (straight),SWF (forward swept),SCB (incorporating forward swept and positive curved) and SWB (backward swept) rectangular compressor cascades have been studied at design and off-design incidences to verify if SCB can achieve better aerodynamic performance.All types of swept or curved blades considered are symmetric to midspan,consisting of an circular arc section in the central part and swept or curved sections toward the endwalls.The effect of incidence change on the distribution of exit total pressure loss and secondary flow vectors of the compressor cascades has been experimentally investigated.Ink-trace flow visualization on blade surfaces was also conducted in a part of incidences.Compared with straight cascade,mechanisms of the total pressure loss increase and decrease with the change of incidence of various swept cascades at different spanwise positions were analyzed.The results show that compared to swept-forward cascades, the swept-curved cascade further prevents the low energy fluid accumulation, which may induce separation in the endwall/suction surface corner region;therefore,remarkably reduce total pressure loss in that region.Even at larger positive incidence the total loss of the swept-curved cascade increases smoothly and no flow separation was observed in the corner.In general,the total pressure loss of swept-curved cascade is not sensitive to incidence change.The study supports the conclusion that SWF and SCB conduce to the improvement of stall margin near the endwall even at higher incidence.Moreover,it is supposed that better aerodynamic performance of SCB can be achieved by increasing design incidence at midspan and by optimizing the matching of swept blade angle and height,and curved blade angle and height.

Numerical Study on the Compressor Aerodynamics Performance of Positive Curved Rotor Blade

Unsteady Numerical Study on the Compressor Aerodynamics Performance of Curved-sweep Rotor Blade

Influence of Positive Curving on Blade Surface Flow of Compressor Cascade

Unsteady Numerical Study on the Compressor Static Pressure Coefficient of a Curved-sweep Rotor Blade

Numerical Investigation for Curved Guide Vane in Gas Turbine

Optimization design of compressor rotor based on bending-swept parameter control

Numerical Research on Effect of 3-D Blade Surface Profiles on Aerodynamic Performance of Centrifugal Compressor Impellers

Numerical simulation of the aerodynamics performance of swept and curved blade on the compressor stator

Investigation of Positive Bowed Stator on Off-design Characteristics in a Multistage Compressor

Investigation of Positively Curved Blade in Compressor Cascade Based on Transition Model

Numerical Investigation of the Unsteady Flow in a Transonic Compressor with Curved Rotors

Experimental study on the aerodynamic performance of aft-loading positive-curving blade

Influence of Partially Bowed Rotor Blades on the Flow Field and Performance in a Compressor

Numerical Optimization Design of Circumferentially Curved Transonic Compressor Rotor

Analysis of Overall Aerodynamic Performance of Axial-Flow Compressor with Attenuated Blade Tip

Effects of circumferential bow angle of curved blade on the performance of compressor cascade

Three Dimensional Swept Rotor Blade Optimization Design for a Counter-Rotating Compressor

Three-dimensional Rotor Optimization in Multi-blade Row of a Dual Stage Counter-rotating Compressor

An Aerodynamic Performance Study of Different Swept-Curved Compressor Cascades under Different Operating Conditions

Research on Design of Swept and Bowed Rotor in a Transonic Axial Flow Compressor

Aerodynamic design and optimization of a high-loaded axial fan stage using a curvature control method