Abstract:The oxy-fuel combustion contributes to carbon capture, while the recirculation of flue gas brings about high concentrations of SO2 and H2O, which can affect the transformation of minerals in high-alkali coal. The staged oxy-fuel combustion, as an effective method for NOx reduction, can also change the ash deposition behavior of high-alkali coal. Two kinds of diluting agents, including pure CO2 for O2/CO2 combustion and simulated "recycled flue gas" (CO2, SO2, and H2O) for O2/RFG combustion, were employed in the present work. The ash deposition and NO emission of high-alkali coal during the staged oxy-fuel combustion were simultaneously studied under O2/CO2 and O2/RFG conditions. The conversion ratios of fuel-nitrogen to NO (CNO) and ash deposition efficiencies (Ed) at different stoichiometric ratios in primary combustion zone (SR1) and different oxygen concentrations were obtained. Afterwards, a series of tests were performed to further analyze the ash deposits. The experimental results show that as SR1 increases from 0.6 to 1.2, CNO jumps from 2.0 % to 23.5 % (O2/CO2 combustion) and from 1.9 % to 19.9 % (O2/RFG combustion). The additions of SO2 and H2O can reduce the NO emission. With the rising SR1, Ed under the O2/CO2 and O2/RFG conditions decreases from 4.0 % to 2.6 % and from 4.8 % to 2.1 %, respectively. At high SR1, the CaSO4 amount declines and the iron contributes less to the ash deposition. In O2/RFG combustion, the small sticky particles of sodium aluminosilicates on large particle surfaces reduce, and the large particles of calcium aluminosilicates shrink because some calcium produces CaSO4. Moreover, the exposure of ferrous iron to H2O helps its oxidization so iron is harder to cause severe adhesion. As O2 concentration rises from 21 % to 40 %, CNO shows an upward trend. Meanwhile, Ed under the O2/CO2 and O2/RFG conditions increases from 2.6 % to 3.7% and from 2.3 % to 2.7%, respectively. The present work is expected to provide some conducive information for the clean utilization of high-alkali coal and secure operation of boiler, as well as large-scale CO2 capture.

The Effect of Ash and Iron Pyrites on NO and SO2 of Coal Combustion

Effects of Na and Fe on the Formation of Coal-Derived Soot in a Two-Stage Flat-Flame Burner

Interaction Between SO2 and NO During Coal's Pyrolysis and During Combustion of the Volatile Ingredients

Effects of SO2 and H2O on the Ash Deposition and NO Emission During Oxy-Fuel Combustion of High-Alkali Coal

[The Effects of Iron Compounds on SO2 and NO Emissions in Coal Combustion Process].

ICOPE-15-C137 the Effect of Minerals in Coal Ash on the Formation of SO_3 in Flue Gas

SO2/NO Emission Characteristics During O2/CO2 Coal Combustion Process

SO_2/NO Emission Characteristics During O_2/CO_2 Coal Combustion Process

Effect of Water Washing on Reactivities and Nox Emission of Zhundong Coals

Effects of coal rank, demineralization and inherent mineral species on SO2 emission in coal combustion process

Effect of steam and limestone on NO during oxy-fuel fluidized bed combustion

Influence of an Iron Compound Added to Coal on Soot Formation

Effect of Coal Ash on NOx Emission of CFB Boilers

Effect of HCl and CO on Sulfur Trioxide Formation Mechanisms During Oxy-Fuel Combustion

Improving So2 And/Or No Removal by Activated Carbon Through Comprehensive Utilization of Inherent Pyrite and Calcite in Coal

Experimental study of NO_x emissions from coal combustion under oxy-fuel conditions

Experimental Study on the Ash Deposition and NO Emission of High-Alkali Coal under the Staged O2/CO2 and O2/RFG Conditions

Effect of calcium-based additives on NO release of coals under different combustion modes

Effect of iron minerals during coaling on the transformation of NO in the presence of NH3: Take pyrite as an example

Experimental Study on NOx Reduction in Oxy-fuel Combustion Using Synthetic Coals with Pyridinic or Pyrrolic Nitrogen

Effect of Inherent Minerals on the Release of Fuel-Nitrogen During Coal Pyrolysis