Abstract:Because of the higher requirements for vehicle comfort and people’s increasing ecological consciousness, research on the interior noise in a vehicle has received wide concern, among which structure-borne noise is hard to diagnose and control. To solve the problem, the transfer path analysis method of powertrain structure-borne noise has been systematically analysed. By introduction of the powertrain source–path–receiver model, this method enables us to estimate and study the vibro-acoustic transfer functions and their operational forces. Since structure-borne noise is composed of multiple paths, the aim of this paper is to discuss different synthesis methods for this noise. On the basis of previous discussion, the transfer path analysis test of a certain vehicle is carried out, and the transfer function and operational data at idle and second-gear wide-open throttle are obtained. The test data are processed and an acoustic contribution analysis of the target is performed using LMS software. The results of analysis show that the right-hand side mount represents the main contribution path. Then the match principle of the bracket dynamic stiffness of the powertrain isolation system is proposed. On the basis of the transfer path analysis results and the above principle, the bracket on the body side of the right-hand side mount is improved by combination of the experimental transfer path analysis and the finite element method. The test results show that the A-weighted sound pressure level of the interior noise at idle and second-gear wide-open throttle are reduced by 2.9 dB(A) and 4 dB(A) respectively after improvement. Also there is no obvious booming noise at second-gear wide-open throttle. It is expected that this paper can help automotive noise, vibration and harshness engineers to perform trouble shooting and sound design.

Automotive Interior Noise Identification Based on Transfer Path Analysis

Study on Transfer Path Analysis Method of Automobile Interior Noise

Time-domain transfer path analysis of automobile interior noise

A Study on the Transfer Path of the Interior Noise of a Fuel Cell Car

Identification of Vehicle’s Interior Noise Source with Operational Transfer Path Analysis

Analysis of Air Borne Noise Contribution of Transfer Paths of FR Vehicles

Transfer path analysis of fuel cell vehicle interior air-borne noise

Identification of Vehicle’s Interior Noise Sources by Using Operational Transfer Path Analysis

TRANSFER PATH ANALYSIS AND CONTROL OF AUTOMOTIVE INTERIOR STRUCTURE-BORNE NOISE GENERATED BY A POWERPLANT

Application of measurement technology of sound intensity in noise source identification of automotive interior noise

Study and Analysis of the Automotive Interior Noise Caused by Medium and High Frequency Vibration

Noise Source Identification Of A Passenger Car Based On Sound Intensity Measurement

A development on the interior noise prediction technology using active noise control algorithm

Transfer Path Analysis and Control of Vehicle Structure-Borne Noise Induced by the Powertrain

Interior Noise Analysis of a Non-load Type Body SUV

Sound Quality Evaluation of Automobile Interior Noise under Transient and Steady-State Running Conditions

Transfer Path Analysis of Powertrain Vibration on Driver's Noise

Transfer Characteristics Model and Noise Sources Identification for Accelerated Vehicle Exterior Noise

Analysis And Control Of Automotive Interior Noise From Powertrain In High Frequency

Research on the procedure for analyzing the sound quality contribution of sound sources and its application

Experimental Research of Interior Noise Reduction for Passenger Car