Abstract:In order to develop wide-band low-loss windows for W-band vacuum electronic devices and easily fabricate them, symmetric and asymmetric pillbox windows are investigated and reported in this paper. A symmetric pillbox window and an asymmetric pillow-box window were designed, simulation optimized, fabricated, and tested. The initial parameters for the two pillbox windows were designed by equivalent circuit theory. Computer simulation technology (CST) three-dimensional (3D) electromagnetic simulation software was used to verify and optimize the design. Because of the uncontrollability of welding during the experiment, this article provides two solutions. One is to measure and reprocess the symmetrical pillbox window with the dielectric sheet welded to reduce the influence of welding on the measurement results; the other is an asymmetrical box window which is designed to avoid the error caused by the welding of the box window. The best experimental results for the symmetric pillbox window were |S21| close to 1 dB and reflection parameter |S11| close to 10 dB in the frequency range of 77–110 GHz. The experimental results for the asymmetric pillbox window were |S21| < 1 dB nearly in the frequency range of 76–109.5 GHz. The experimental results show that both solutions efficiently complete the design of broadband pillbox windows and would potentially be operated in the gigahertz millimeter-wave region.

A Study on a Ka-Band Power Window with Thicker Ceramics

Design of High Power Microwave Ceramic Windows in C-Band

Design of a New Ceramic Window in 3.7ghz LHCD Transmission System

Low-diffraction EMI-shielding Multiband Optical Window Based on Randomized Metallic Mesh

A New Type Ka Band Pillbox

Development of RF windows for 650 MHz multibeam klystron

Design of 3.7ghz BeO Ceramic Window

Terahertz Brewster Window for Ultrabroadband Gyrotron Application

Design and Measurement of a Broadband Beryllium Oxide Window With High Power Handling Capability

Thermal Infrared And Broadband Microwave Stealth Glass Windows Based On Multi-Band Optimization

Design of advanced dielectric RF windows for dual-band Gyro-TWT

A Broadband Low-Lessw-band Pill-box Window

Design of Submillimeter Wave Receiver Window with High Transmittance, High Intensity and Infrared Filtering

Experimental Study of an Overmoded V-Band Sapphire Pillbox Window

Scattering Matrix Analysis of a High-Power Pill-Box-type Window Without Ghost Mode

Investigation on Symmetric and Asymmetric Broadband Low-Loss W-Band Pillbox Windows

Investigation and Batch Fabrication of G-Band Broad Band and Low Loss Monocrystalline Diamond Window for Vacuum Electron Devices

Improving the Threshold of Multipactor Using a Graded Permittivity Dielectric Window

Investigation and Fabrication of a Low Loss and Wideband Single Crystal Diamond Vacuum Window for W-Band Traveling Wave Tube

Fabrication of High Power Microwave Feed Output Window

Multispectral smart window: Dynamic light modulation and electromagnetic microwave shielding