Abstract:A new kind of structural and functional integration ceramic matrix composite material was prepared from high‐performance alumina (Al2O3) fibers and absorbing silicon carbonitride (SiCN) ceramics via a combination of polymer infiltration pyrolysis (PIP) and chemical vapor infiltration (CVI) methods. The Al2O3 fiber annealed at its cracked temperature had enhanced permittivity, because the sizing agent on the Al2O3 fiber surface was cracked into pyrolysis carbon. For PIP+CVI Al2O3f /SiCN composites, PIP SiCN matrix with low conductivity was used as the matching phase, while CVI SiCN matrix with medium permittivity and dielectric loss was regarded as the reinforcing phase distributed in porous PIP SiCN matrix and inter‐bundles of Al2O3 fiber to improve their mechanical and microwave absorption properties. The fracture toughness and flexural strength of Al2O3f /SiCN composite were determined to be 9.4 ± 0.5 MPa•m1/2 and 279 ± 28 MPa, respectively. Based on the design principles for impedance matching, the Al2O3f /SiCN composites before and after oxidation were used as loss and impedance layers, respectively. It was found that the optimized composite had the lowest reflection coefficient (RC) of ‐70 dB and the effective absorption bandwidth (EAB) covering the whole X‐band. In conclusion, Al2O3f /SiCN composite can serve as a high‐temperature structural material with excellent microwave absorption properties for aerospace applications.

Design and Preparation of Wave-Transmitting Reinforcing Coatings for Multifunctional Ceramic Composite Antenna Windows

Effect of Ceramic Powder on the Performance of Coating

Design on the Microwave Absorber with Lattice of 3D Composite Element for X-band Application

Multiscale SiCnw and carbon fiber reinforced SiOC ceramic with enhanced mechanical and microwave absorption properties

Silicone composite coating for composite quartz ceramics with excellent water and moisture resistance

Design, formation, and property of high emissivity WSi2-Si-glass hybrid coating on fibrous ZrO2 ceramic for reusable thermal protection system

Microwave absorbing ceramic coatings with multi-walled carbon nanotubes and ceramic powder by polymer pyrolysis route

Increased microwave absorption property of porous Si3N4 ceramics by loading polymer-derived SiCN for a multifunctional design

Boron nitride based composite ceramic wave-transparent material and preparation method thereof

Study on the fiber/matrix interface modification of Si3N4 f/SiO2 composites with polymer derived double-layer coatings

Effect of volume ratio on the performance of mid-wave infrared transparent Gd 2 O 3 –MgO composite ceramics

Design and fabrication of Al 2 O 3 f /SiCN composite with excellent microwave absorbing and mechanical properties

Reaction Behavior, Microstructure, and Radiative Properties of In Situ ZrB 2 -SiC Ceramic Composites from a Si-Zr-B 4 C System

Effect of Different Forms of Silica on Sintering, Microstructure and Properties of Borosilicate Glass/al2o3 Composites

Microwave dielectric characterization and densification mechanism analysis of CaO‐B2O3‐SiO2 glass‐ceramic/Al2O3 composites for LTCC applications

Impedance matching strategy boost excellent wave absorption performance of zinc-Aluminosilicate cladded short carbon fiber core-sheath structure

Design and preparation of sandwich structured Si3N4 ceramics for broadband microwave transmission

Multiscale design and digital light processing preparation of high-strength SiOC ceramic metastructures for tuning microwave absorption properties

Preparation of low-permittivity K2O–B2O3–SiO2–Al2O3 composites without the addition of glass

Preparation and properties of Al2O3-PF composite functional protective coating on the surface of polymer matrix composites

Hierarchically Structured Ceramic Coatings Based on Zirconia and Magnesium Oxide with High Toughness