Mathematical modeling of mercury removal from simulated flue gases
REN Jian-li,ZHOU Jin-song,LUO Zhong-yang,ZHONG Ying-jie,CEN Ke-fa
DOI: https://doi.org/10.3785/j.issn.1008-973X.2006.10.035
2006-01-01
Abstract:A mathematical model was developed to simulate elemental mercury sorption in the fixed bed reaction system,which is based on the mechanisms of mass transfer from external surfaces to internal surfaces and interior of sorbents particle.The detailed model was combined with surface equilibrium process, key mass transfer,and material balance equations that govern adsorption of Hg vapors.The model was used to model mercury sorption processes at different conditions in laboratory fixed-bed tests,and to predict the Hg removal performance with the effect of various sorbents properties and operating parameters.The simulation results indicated that the model is capable of describing the test data,and that the particle size,contact time,mercury inlet content, adsorption temperature and etc,influence the removal capacities.The system is mass-transfer limited,and smaller particle size results in better mercury removal,while large particles surface area limits the rate at which mercury can be absorbed and equilibrium is not approached;For a given temperature and C/Hg ratio,the rate of mercury uptake increases with an increase in the initial mercury concentration,and the longer contact residence time of sorbents with the gas,the more sorbents are available that allows 100% ratio at breakthrough curve to be approached more slowly,however,sorbents possess a lower absorption capacity of per unit mass.