Numerical Simulation of Homogeneous Elemental Mercury Oxidation Within an Electrostatic Precipitator
Guohai Huang,Hongxiao Zu,Zequn Yang,Wenqi Qu,Chenghang Zheng,Jianping Yang,Hailong Li
DOI: https://doi.org/10.1016/j.ces.2024.120968
IF: 4.7
2024-01-01
Chemical Engineering Science
Abstract:The corona discharge in electrostatic precipitator (ESP) can contribute to homogenous Hg0 oxidation, thus favoring the simultaneous removal of mercury by the existing air pollution control devices in coal-fired power plant. A multi-field model consisting of reaction kinetics and dynamics was established to simulate the Hg0 oxidation performance in ESPs. The HCl dissociation products (i.e., Cl and Cl2) were responsible for the oxidation of Hg0 to HgCl2 and HgCl, in which the Hg0 oxidation efficiency (EHg) was increased from 13.3 % to 52.6 % with the increase of HCl concentration from 1 to 4 ppm. The increase of O2 concentration from 2 % to 8 % resulted in 2.1 % reduction of EHg, which was primary attributed to the inhibition of HCl dissociation process to form Cl-containing species. As the H2O content increased from 3 % to 12 %, EHg rose from 25.9 % to 29.1 %, due to H2O dissociation products (i.e., H and OH) enhancing the formation of Cl-containing species from HCl dissociation. The voltage fluctuations demonstrated dual effects on EHg: increasing from 35 kV to 40 kV reduced efficiency from 27.3 % to 26.4 %, attributed to diminished Cl-containing species, whereas further increasing to 50 kV enhanced efficiency to 32.1 % due to increased production of O-containing substances. A higher flow rate facilitated the escape of reactive chemical species from ESPs. The EHg decreased from 36.3 % to 17.5 % when the flow velocity increased from 0.1 to 0.25 m/s. These results clarified the key factors for affecting Hg0 oxidation within an ESP, which provides the fundamental to simultaneously control Hg0 emission from coal-fired power plants.