Abstract:It is difficult for the conventional single-stage compression auto-cascade refrigeration cycle to achieve higher refrigeration efficiency and lower refrigeration temperature, because the stream rich in high boiling point component from the phase separator bottom undergoes a single-stage compression process of high pressure lift ratio. Based on the concept of the evaporating temperature of the high/low boiling point component matching the grade compression of two streams from the phase separator, a component-based double-stage compression auto-cascade refrigeration (CDACR) cycle using R170/R600a is proposed in this paper. In the novel cycle, one dedicated compressor with two suction ports is used as the substitute for a conventional compressor with the sole suction port to realize grade compression process of the component of the refrigerant mixtures, and the stream enriched with high boiling point component from the separator bottom is sucked into the high-pressure suction port and undergoes the low-pressure-lift-ratio compression process, while the stream rich in low boiling point component from the separator top is sucked into the low-pressure suction port and executes the high-pressure-lift-ratio compression process, so as to cut down the compressor power consumption and obtain a lower refrigeration temperature. The mathematical model of the proposed cycle is developed to evaluate the thermodynamic performance of the system and comparisons with the conventional single-stage compression auto-cascade refrigeration (SCACR) cycle are also discussed. The results indicate that application of the component-based grade compression to the conventional auto-cascade refrigeration cycle dramatically improves the performance of the CDACR cycle, and there is optimum composition ratio of refrigerant mixtures for the CDACR cycle to obtain the highest coefficient of performance ( COP ). It is also shown that the performance of the CDACR cycle is significantly better than that of the SCACR cycle. As compared with those of the SCACR cycle, the compressor power consumption of the CDACR cycle decreases by 44.83%-53.17%, and its COP increases by 0.34–0.43, as the evaporating temperature at the evaporator outlet ranges from −60 °C to −40 °C. In addition, at the condenser outlet temperature in the range of 26 °C- 40 °C, the compressor power consumption for the proposed cycle is 37.74%-47.03% lower than that for the SCACR cycle, while COP of the CDACR cycle is 0.29–0.42 higher than that of the SCACR cycle.

Performance Analysis on Two-stage Compression forward Bootstrap Air Refrigerator

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Theoretical Analysis of a Novel Two-Stage Compression System Using Refrigerant Mixtures

Thermodynamic evaluation of two-stage refrigeration cycle with deep intercooling and series-parallel integration of thermal and mechanical compression

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Performance Study on Quasi Two-stage Compression Cycle Composed by Different Type of Refrigerant Compressor

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Analysis of Features of J-T Refrigeration Cycles Using Mixed Refrigerants with an Infinite Low Temperature Heat Reservoir

Research and Analysis of the New Cycle with Super-Subcooling Single Stage Ammonia Compression Refrigeration System

Proposal and thermodynamic analysis of an ejection-compression refrigeration cycle driven by low-grade heat

Research on a new two-stage compression for heat pump air-conditioning with R32

Study on the Coupled Characteristics of High-Speed Centrifugal Compressor and Turboexpander of a Reverse Brayton Air Refrigerator

Proposal and performance study on a component-based double-stage compression auto-cascade refrigeration cycle

Performance analysis of reverse-Brayton air refrigerator

Experimental and Analytical Study of a Reverse-Bootstrap Air Refrigerator for Fresh Air-Conditioning

Experimental analysis on the performance of a regenerative brayton refrigeration cycle

A Study On A New Auto-Cascade Refrigerating Cycle

Performance of a Single-Stage Linde-Hampson Refrigerator Operating with Binary Refrigerants at the Temperature Level of −60 °C

Upper-limit of Performance Improvement by Using (quasi) Two-Stage Vapor Compression

Effect of Inter-Stage Pressure on Performances of Two-Stage Transcritical CO2 Refrigeration Cycle with Dedicated Absorption Dual-Subcooling and Mechanical Recooling