Abstract:In order to explore the coupling effects of second shear flow and temperature fields on the formation as well as the evolution of crystal morphologies of high-density polyethylene (HDPE), the crystal morphologies of the parts obtained by multi-fluid multi-injection molding (MFMIM) were investigated. The main feature of MFMIM is that the polymer melts in two different injection units are injected sequentially into the cavity to form an encapsulated sandwich-structure product. Polarizing light microscopy (PLM) results showed that some peculiar microstructures (e. g. cylindritic structures and ring-banded spherulites) were generated in the skin layer of the MEMIM parts. With the aid of scanning electronic microscopy (SEM), a detailed description of cylindritic structure was obtained, which showed that the cylindritic structure consisted of some ring-banded spherulites. For comparison,the crystalline morphology of the sample molded by conventional injection molding (CIM) was also investigated. Different from the MFMIM parts, there were not observed any ring-banded spherulites or cylindritic structures in CIM parts except the common spherulites. And there was not a significant skin-core structure formed due to the higher temperature of the mold. Based on the comparison between the experimental results of the MFMIM parts and those of the CIM counterparts, it was concluded that the main reasons for ring-banded spherulites and cylindritic structures arising in the skin layer of MFMIM parts were the shearing and the complex thermo-mechanical fields provided by the secondary melt penetration process. Therefore, on the basis of the previous results, the mechanisms of ring-banded spherulites and cylindritic structures formation were discussed.

Morphology of PC/PE Blend Molded by Gas-Assisted Injection Molding

The Role of Gas Penetration on Morphological Formation of Polycarbonate/polyethylene Blend Molded by Gas-Assisted Injection Molding

Morphology-Tensile Behavior Relationship in Injection Molded Poly(Ethylene Terephthalate)/Polyethylene and Polycarbonate/Polyethylene Blends (I) - Part I - Skin-Core Structure

Morphology of GF Reinforced HDPE Composite Molded by Gas Assisted Inject Ion Molding

Multi-Layered Structure of Ipp Molded by Gas-Assisted Injection Molding

Gas-assisted injection molded polypropylene: The skin-core structure

Morphology of Polystyrene/Polyethylene Molded by Multi-Melt Multi-Injection Molding

Crystalline Morphology of HDPE Molded by Gas Assisted Injection

Transcrystallinity in a Polycarbonate(PC)/Polyethylene(PE) Blend Prepared by Gas-Assisted Injection Molding: A New Understanding of Its Formation Mechanism

Hierarchical Crystalline Structure of Hdpe Molded by Gas-Assisted Injection Molding

Morphology Dependent Double Yielding in Injection Molded Polycarbonate/Polyethylene Blend

Morphology and mechanical property of high-density polyethylene parts prepared by gas-assisted injection molding

THE EFFECT OF GAS-ASSSTED NJECTON MOLDNG ON THE CRYSTALLNE MORPHOLOGY OF HDPE AND TS NUMERCAL SMULATON

CRYSTAL MORPHOLOGY OF HDPE MOLDED BY MULTI-FLUID MULTI-INJECTION MOLDING

Morphological study of linear low-density polyethylene molded by gas-assisted injection molding

Banded Spherulites of Hdpe Molded by Gas-Assisted and Conventional Injection Molding

Foaming Structure Formed in Glass Fiber Reinforced PP Molded by Gas-assisted Injection Molding

Injection Molding-Induced Morphology of Thermoplastic Polymer Blends

Cylindritic Structures of High-Density Polyethylene Molded by Multi-Melt Multi-Injection Molding

Morphological Evolution of HDPE Parts in the Microinjection Molding: Comparison with Conventional Injection Molding

Crystallization Behavior and Molecular Orientation of High Density Polyethylene Parts Prepared by Gas‐assisted Injection Molding