Abstract:Aiming to the complexity of melt flow in microcellular injection molding caused by multiphase intercoupling, this study explores the nonlinear and strong coupling relationship between process parameters and crystallinity. By optimizing molding parameters to regulate crystallinity, the mechanical properties are enhanced. Furthermore, a multivariate nonlinear regression model is developed to further improve the macroscopic mechanical properties of foamed products. Microcellular injection molding (MIM) is a pivotal technique for lightweight molding. Polypropylene (PP) is widely used in MIM due to light weight and easy processing. The crystallinity of foamed PP products influences the load‐bearing structures and consequently mechanical properties. To address the deterioration of mechanical properties caused by internal porous structure, a novel method is proposed to regulate the crystallinity by optimizing process parameters, thereby improving mechanical properties. Wide‐angle x‐ray diffraction, mechanical testing, and melt flow simulation are applied to investigate the influence of process parameters on crystallinity and mechanical properties. Parameters are further optimized by establishing a multivariate nonlinear regression model for process parameters and crystallinity. The results show that increasing melt temperature, injection rate, mold temperature, and cooling time stimulate crystallization, enhancing strength and decreasing elongation at break. Conversely, high injection ratio of supercritical fluid obstructs crystallization, reducing strength, and increasing elongation at break. The crystallinity increases by 20.81%; the corresponding tensile, flexural, and shear strength and corresponding modulus increases by 5.39% and 10.28%, 7.60% and 18.50%, 5.00% and 11.37%, and elongation at break decreased by 5.19% through the optimization of regression model. The proposed method is feasible to upgrade the mechanical properties of foamed PP products.

Morphology and mechanical property of high-density polyethylene parts prepared by gas-assisted injection molding

Crystallization kinetics and crystalline structure of biodegradable Poly(ethylene adipate)

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights

PE/PE‐g‐MAH/Org‐MMT Nanocomposites. II. Nonisothermal Crystallization Kinetics

Synthesis and Characterization of High‐density Polypropylene‐grafted Polyethylene Via a Macromolecular Reaction and Its Rheological Behavior

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

Effect of gas on the polymer temperature in external gas-assisted injection molding

Study on Crystallization Kinetics of Partially Melting Polyethylene Aiming to Improve Mechanical Properties

Characterisation of Formulated High-Density Poly(ethylene) by Magic Angle Spinning Nuclear Magnetic Resonance

MORPHOLOGICAL EVOLUTION AND VISCOELASTIC BEHAVIOR OF COMPATIBILIZED HDPE/PA6 BLENDS

Crystal morphology and tensile properties of LLDPE containing PP fibers as obtained via dynamic packing injection molding

Nanostructure and Mechanical Measurement of Highly Oriented Lamellae of Melt-Drawn HDPE by Scanning Probe Microscopy

The influence of UHMWPE with varying morphologies on the non-isothermal crystallization kinetics of HDPE

Morphology and Plastic Yielding of Ultrahigh Molecular Weight Polyethylene

Effect of small amount of ultra high molecular weight component on the crystallization behaviors of bimodal high density polyethylene

Mechanical Energy and Thermal Effect Controlled Micropore Nucleation and Growth Mechanism in Oriented High Density Polyethylene

Investigation on mechanical, electrical and morphological of high-density polyethylene (HDPE) reinforced with different particle size and composition of graphene nanoplatelets (GNP)

Crystallinity and mechanical properties of polypropylene products foamed by microcellular injection molding process

Nanostructure Evolution of Isotropic High-Pressure Injection-Molded Uhmwpe During Heating

Effects of Processing Method and Parameters on the Wall Thickness of Gas-Projectile-Assisted Injection Molding Pipes