Abstract:System overvoltages in the renovated ±500 kV DC power transmission project from Tianshengqiao to Guangzhou under four typical fault conditions,i.e.,single-phase grounding occurred at upper-half rectifier bridge side of wye-wye connected winding of converter transformer,interphase switching surge from AC system,loss of AC power supply occurred at inverter side and inverter being blocked with unblocked bypass pairs,are analyzed and computed to ensure overvoltage at different positions in the grid as well as energy consumption of arresters can be restricted within rational ranges by renovated control and protection system,thus the secure operation of all power equipments can be implemented.Analysis results show that higher overvoltages will appear at neutral-bus due to single-phase grounding occurred at valve side of wye-wye connected winding of converter transformer,and the energy consumption of neutral-bus arrester will also be higher;higher overvoltage will appear at the terminals of rectifier valves due to interphase switching surge from AC system and it makes valve arrester operated;higher overvoltage will occur at AC bus of inverter station due to the loss of AC power supply at inverter side and it makes AC bus arrester operated;a rather high overvoltage will appear on DC polar line at inverter side due to inverter being blocked with unblocked bypass pairs and it makes a high energy consumption of arrester of DC polar line.The energy consumption of all arresters does not yet exceed the designed discharging capability under these four fault conditions,thus secure and stable operation of all arresters can be ensured.

Analysis of Converter Transformer Protection Reformation and Research of Testing Technology

Analysis on Overvoltage in Renovated Control and Protection System for HVDC Power Transmission Project from Tianshengqiao to Guangzhou

Analysis on Insulation Coordination Scheme for ±800 Kv DC Converter Station

Research and Application on One Time Through-Flow Test Methods of HVDC Converter Rheological

Analysis research on bivalve group trip caused by midpoint ground fault in pole Ⅱ circuit of Pu''''er converter station

Analysis of Fault and Protection Strategy of a Converter Station in MMC-HVDC System

Research on transient overvoltage for converter station of Zhoushan multi-terminal VSC-HVDC project

Control Principle and Protection Analysis of the HVDC Open Line Test

Analysis and improvement of transformer overvoltage protection under high altitude electromagnetic pulse

Application Research on Pilot Protection Method for Multi‐terminal Hybrid Line‐commutated Converter/modular Multilever Converter‐based High Voltage DC System

Interference analysis and suppression technology of converter transformer partial discharge test based on field measurement

Research on AC bus differential protection of flexible DC transmission system

Analysis of the Non-protective Trip in Longquan Converter Substation's MACH2 System

Analysis of DC Pole-to-Pole Fault for Converters in MVDC Shipboard Power System

Research of Undervoltage Sensing Protection at Tuanlin Converter Station

Backup protection research for HVDC transmission line considering the impact of DC control system

Study of Bin-Jin UHVDC project commutation failures protection

A Review of the Protection Methods in DC Distribution System

Study on the key problems of DC filter protection

Research of power reversal protection in Gaoling converter station

Research on DC Protection Strategy in Multi-Terminal Hybrid HVDC System