Investigation of Pinning in Moving Bed

CHEN Yun-hua,ZHU Xue-dong,WU Yong-qiang,ZHU Zi-bin

DOI: https://doi.org/10.3321/j.issn:1003-9015.2007.03.008

2007-01-01

Abstract:The pinning phenomenon was investigated respectively in three kinds of two-dimensional rectangular moving beds, their cross-flow sections of the gas flow have the same height of 430 mm and their widths are 400 mm, 200 mm and 105 mm separately. The experiments show that the bed pressure drop produced by the gas flow increases with the increase of gas velocity, and when the pressure drop is increased to a value high enough ― the critical pressure drop causing pinning, some particles close to the downstream face of the gas flow would stick together on the face and stop moving downwards, then the pinning occurs. Experiments also show that the pinning thickness increases linearly with the increase of pressure drop, and under the same gas velocity, the pinning thickness in the bed with wider cross-flow section of the gas flow is larger than that in the bed with narrower cross-flow section, while the dimensionless pinning thicknesses are almost equal for moving beds with different widths mentioned above. Base on the force balance, a mathematic model of pinning phenomenon was proposed, using it, the critical pressure drop causing pinning and the thickness of the pinning can be predicted. The calculating results of the model agree well with the experimental data.