Abstract:The aspheric test via finite distance null compensation is limited by too many adjustment factors and low test precision. Here we establish an aspheric test system by integrating front null compensation with back null compensation, in which a compensation lens is used before and after the spherical center of the mirror to be tested and thus the front and back areas show aberration correlation. First, based on the aberration theory, the optical parameters of two compensation lenses arc theoretically derived and solved, and the relationship between the initial parameters and the normalized data is analyzed. Then the normalized results arc scaled and optimized by the optical design software. Four concave parabolic mirrors with different curvature radii arc designed under different magnifications of front null compensation lenses. The maximum aperture and the maximum relative aperture of the aspheric mirror arc obtained. The compensation lens with a 1/10 aperture ratio is used to realize the aspheric test of an aspheric mirror with a large aperture of 3.7 m and a large relative aperture of 1/1.2, and the peak-valley (PV) value of the residual wavefront error is superior to 0.1 lambda (lambda=633 nn). The tolerance analysis confirms that the test system is feasible. The principle experiment is conducted for the parabolic mirror with an aperture of 500 mm and a relative aperture of 1/1. The maximum diameter of the aspheric mirror and the difficulty of implementation arc compared between the proposed method and the classical configuration. The PV value and the RMS value of the designed wavefront error of the test system combining front and back null compensation is 0.061 lambda and 0.009 lambda, respectively. The RMS value is superior to lambda/10. The test system combining front and back null compensation is suitable for the high-precision test of aspheric surfaces with I m large diameter and large relative aperture.

Alignment of Diffractive Optical Compensator Used for Aspheric Test

Research of precision interference locating method for a partial null compensator at aspheric testing

Interferometry Measurement Of Parallel Optical Plate Wavefront

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

Novel Algorithm for Compensating Misalignment in Optical Spherical Surface Testing

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Non-null interferometric aspheric testing with partial null lens and reverse optimization

Comprehensive Design and Calibration of an Even Aspheric Quarter-Wave Plate for Polarization Point Diffraction Interferometry.

Polarization Point Diffraction Interferometry Based on an Even Aspheric Quarter-Wave Plate

Digital testing of transmitted wavefront distortion for micro-optics

Optimization of Longitudinal Alignment of an 4<i>f</i> System in a Compact Vectorial Optical-Field Generator Based on a High-Resolution Liquid Crystal Spatial Light Modulator

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Reverse Optimization Reconstruction of Aspheric Figure Error in a Non-Null Interferometer

Optimization of Transverse Translation Diverse Phase Retrieval for Optical Elements with Mid-Spatial Frequency Errors

Aspheric Test Combining Front and Back Null Compensation for Infinite Optical Path

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

Compensator Design for Aspheric Testing Using Virtual Glass Model

Error analysis and processing of partial compensatory aspheric testing system

Research on Coherent Stray Light Fringes in Interference Compensation Testing

Autocollimating compensator for controlling aspheric optical surfaces