Abstract:PURPOSE:Cone-beam (CB) CT is a powerful noninvasive imaging modality, and is widely used in many applications. Accurate geometric parameters are essential for high-quality image reconstruction. Usually, a CBCT system with higher spatial resolution, particularly on the order of microns or nanometers, will be more sensitive to the parametric accuracy. Here, we propose a novel calibration method combining a simple phantom containing ball bearing markers and an advanced optimization procedure. This method can be applied to CBCT with reproducible geometry and frame-to-frame invariant geometric parameters.METHODS:Our proposed simplex-simulated annealing procedure minimizes the cost function that associates the geometrical parameters with the degree to which the back projections of the ball bearings in projections from various viewing angles converge, and the global minimum of the cost function corresponds to the actual geometric parameters. Specifically, six geometric parameters can be directly obtained by minimizing the cost function, and the last parameter, the distance from source to rotation axis (SRD), can be obtained using prior knowledge of the phantom - the spacing between the two ball bearings.RESULTS:Numerical simulation was performed to validate that the proposed method with various noise levels. With the proposed method, the mean errors and standard deviations can be reduced to ∼10% and less than 1/3 of a competing benchmark method in the case of strong Gaussian noise (sigma = 200% of the pixel size) and large tilt angle (tilt angle = - 4 ∘ ). The calibration experiments with micro-CT and high-resolution CT scanners demonstrate that the proposed method recovers imaging parameters accurately, leading to superior image quality.CONCLUSION:The proposed method can obtain accurate geometric parameters of a CBCT system with a circular trajectory. While in the case of micro-CT the proposed method has a performance comparable to the competing method, for high-resolution CT, which is more sensitive to geometric calibration, the proposed method demonstrates higher calibration accuracy and more robustness than the benchmark algorithm.

Structural Deviation Calibration and Parameters Obtaining Algorithm for Linear Array Detector CT System

Analytical Geometric Parameter Calibration Algorithm for Cone-Beam CT

High Accuracy Calibration Method for Multi-Line Structured Light Three-Dimensional Scanning Measurement System Based on Grating Diffraction.

An automatic calibration algorithm for endoscopic structured light sensors in cylindrical environment

A Projector Calibration Method for Fringe Projection System

A Projection Matrix-Based Geometric Calibration Algorithm In Cbct System

Rotation Center Calibration of CT System Based on Geometric Analysis and Iterative Correction

An interval subdividing based method for geometric calibration of cone-beam CT

Geometric Calibration Based On Matrix Calculation For Cbct System With A Flat-Panel Detector

A Wire Scanning Based Method for Geometric Calibration of High Resolution Ct System

A calibration method for misaligned scanner geometry in cone-beam computed tomography

Investigations into the Geometric Calibration and Systematic Effects of a Micro-CT System

A Novel Calibration Method Incorporating Nonlinear Optimization and Ball‐bearing Markers for Cone‐beam CT with a Parameterized Trajectory

CT geometrical deformation calibration method in animal dual-modality CT-SPECT system

Scanning parameter measurement and projected image correction for microfocus X-ray imaging system

A simple and precise alignment calibration method for cone-beam computed tomography with the verifications

A novel method of micro-tomography geometric angle calibration with random phantom

Geometric Calibration Of Cone-Beam Ct With A Flat-Panel Detector

Geometric Artifacts Correction of Equiangular Fan-Beam Industrial CT System

Automatic Calibration Method of Voxel Size for Cone-beam 3D-CT Scanning System

Misaligned Cone Beam Computed Tomography Reconstruction Based on a Camera Model