Abstract:Objective: Beam hardening (BH) artifacts in computed tomography (CT) images originate from the polychromatic nature of X-ray photons. In a CT system with a bowtie filter, residual BH artifacts remain when polynomial fits are used. These artifacts lead to worse visuals, reduced contrast, and inaccurate CT numbers. This work proposes a pixel-by-pixel correction (PPC) method to reduce the residual BH artifacts caused by a bowtie filter. Approach: The energy spectrum for each pixel at the detector after the photons pass through the bowtie filter was calculated. Then, the spectrum was filtered through a series of water slabs with different thicknesses. The polychromatic projection corresponding to the thickness of the water slab for each detector pixel could be obtained. Next, we carried out a water slab experiment with a mono energy E = 69 keV to get the monochromatic projection. The polychromatic and monochromatic projections were then fitted with a 2nd-order polynomial. The proposed method was evaluated on digital phantoms in a virtual CT system and phantoms in a real CT machine. Main results: In the case of a virtual CT system, the standard deviation of the line profile was reduced by 23.8%, 37.3%, and 14.3%, respectively, in the water phantom with different shapes. The difference of the linear attenuation coefficients (LAC) in the central and peripheral areas of an image was reduced from 0.010cm -1 to 0.003cm -1 and 0.007cm -1 to 0 in the biological tissue phantom and human phantom, respectively. The method was also validated using CT projection data obtained from Activion16. The difference in the LAC in the central and peripheral areas can be reduced by a factor of two. Significance: The proposed PPC method can successfully remove the cupping artifacts in both virtual and authentic CT images. The scanned object's shapes and materials do not affect the technique.

Geometric Artifacts Correction of Equiangular Fan-Beam Industrial CT System

Artifacts Correction Method for Fan-Beam Ct with Projections Asymmetrically Truncated on Both Sides

Geometric Correction of Fan-Beam X-Ray Fluorescence CT Based on Local Linear Relationship

Sinogram fusion-based metal artifact correction method

A correction method for nonlinear artifacts in CT imaging

Calibration of Geometrical Parameters in 3D Cone-beam CT

Geometric Artifact Correction for Symmetric Multi-Linear Trajectory CT: Theory, Method, and Generalization

An Innovative Beam Hardening Correction Method for Computed Tomography Systems

A Post-Processing Beam Hardening Correction Method for Axial Computed Tomography.

Robust Beam Hardening Artifacts Reduction for Computed Tomography Using Spectrum Modeling.

Beam hardening correction method for Cone-Beam computed tomography based on reprojection of slice contours

New Simple Method of X-Ray Beam Hardening Correction for CT Reconstruction

Correct Block Artifacts by Differential Projection for A Dynamic Computed Tomography System

Geometric Artifacts Correction for Computed Tomography Exploiting A Generative Adversarial Network

Non-convex Optimization Based Optimal Bone Correction for Various Beam-Hardening Artifacts in CT Imaging.

WE-G-18A-03: Cone Artifacts Correction in Iterative Cone Beam CT Reconstruction

Pixel-by-pixel correction of beam hardening artifacts by bowtie filter in fan-beam CT

Beam Hardening Correction for Interior Tomography Based on Exponential Formed Model and Radon Inversion Transform

Integrated Correction for Cone-Beam Computed Tomography Artifacts Based on Digital Radiography Model

Beam hardening artifact correction in CT based on re projection

A Model-Based Scatter Artifacts Correction for Cone Beam CT