Abstract:Ni-based coating, as an excellent anti-corrosion material, is widely used in the petroleum field and has become a research hotspot in recent years. With the continuous progress of the petrochemical industry, especially in the carbon capture, utilization, and storage and enhanced oil recovery (CCUS-EOR) systems, Ni-based coatings face significant challenges. Based on the latest research status, this paper describes the influence factors of Ni-based coatings and the applicability of different Ni-based coatings. Research shows that CO2 and H2S are the key factors affecting corrosion. With the increase in CO2 and H2S content in the environment, the corrosion rate of carbon steel will be accelerated. When the CO2 content reaches a certain critical value, further increasing the CO2 content will reduce the corrosion rate. The corrosion mechanism of carbon steel under the combined action of CO2 and H2S was also analyzed. At a high CO2/H2S partial pressure ratio, the corrosion process is dominated by CO2 corrosion, and with the increase in the H2S/CO2 partial pressure ratio, the corrosion process shifts to H2S corrosion control. The application of Ni-P protective coatings in this corrosive environment has been investigated. A surface Ni-P coating is extremely hard, wear-resistant, and corrosion-resistant. It can withstand the corrosion of CO2, high salinity, and other media while preventing electrolyte penetration. It exhibits strong corrosion resistance in NaCl solution and can help prevent scaling. However, in the presence of CO2-H2s, it has been discovered that due to inherent faults in Ni-P, the corrosion phenomenon may be exacerbated by the action of H2S, and its protection ability has to be further investigated. The mechanical properties and corrosion resistance of the coating can be enhanced by adding particles to the coating, and four new coating systems, Ni-Fe-P, Ni-Cu-P, Ni-W-P, and Ni-W-P-nSiO2, were introduced. Finally, the future development focus and prospect of CO2 corrosion protection coatings under harsh conditions are prospected.

Research Progress on CO2 and H2S Corrosion on Tubular and Its Protection

PROGRESS IN RESEARCH ON CO2/H2S CORROSION OF TUBULAR GOODS

Progress in Research on Ni-Based Protective Coatings for Downhole Tubing Steel in CO2 Flooding

Research Progress on C02/H2S Corrosion and Protection Technique in Oil and Gas Fields

Effect of Ti Microalloying on the Corrosion Behavior of Low-Carbon Steel in H2S/CO2 Environment

RECENT DEVELOPMENTS IN CARBON DIOXIDE CORROSION OF N80 WELL TUBE STEEL

Effect of carbon dioxide on corrosion of tubular steel in high hydrogen sulfide and carbon dioxide environments

CO2/H2S Corrosion Behavior of Tubular Steel N80 at Different H2S Partial Pressures

ANTI-CORROSION TECHNOLOGIES FOR TUBINGS IN OIL AND GAS WELLS

Unraveling the Impact of Cr Content on the Corrosion of Tubing Steel in High CO2 and Low H2S Environments

Insights into the effect of H2S on the corrosion behavior of N80 steel in supercritical CO2 environment

PREDICTION AND PREVENTION OF CO2 CORROSION OF OIL TUBULAR GOODS

Review of Recent Progress in the Study of Corrosion Products of Steels in a Hydrogen Sulphide Environment

CO_2 Corrosion and Protection Technology in Oil and Gas Field

Effect of CO2 Partial Pressure on CO2/H2S Corrosion of Oil Tube Steel

Unraveling the effect of H2S on the corrosion behavior of high strength sulfur-resistant steel in CO2/H2S/Cl− environments at ultra high temperature and high pressure

Hydrogen Sulfide Corrosion of Metal Equipment in Oil and Gas Field

Advanced Corrosion Resistance and Mechanistic Insights of Electroless Ni-P-PTFE Coatings on L245NS Substrate in H2S-saturated Environments

Influence of H2S on the general corrosion and sulfide stress cracking of pipelines steels for supercritical CO2 transportation

Research Progress on Environmental Corrosion Resistance of Thermal Barrier Coatings: A Review

Insights into the Electrochemical Corrosion Behavior and Mechanism of Electroless Ni-P Coating in the CO2/H2S/Cl− Environment