Abstract:The series resonance type fault current limiter has the advantages of simple operating principle and topological structure,etc. The primary parameter of series resonance type fault current limiter for high-voltage system is reasonable.However,in the process of restraining fault current after a fault occurrence in electrical network,the capacitor and parallel inverter switch will confront poor working condition.This paper studies the above condition by simulation using the software Matlab.Proceeding from the study,we arrive at the conclusions:1)in the process of closing the inverter switch short circuit capacitor to make the current limiter work in short circuit current limiting mode switching from normal operation mode,there is higher-order of voltage(current)oscillation between capacitor and parallel inverter switch,and the peak value of voltage(current)increases and oscillates with the growing of the speed for closing the inverter switch; 2)when the inverter switch is composed of semiconductor device,control system must respond to short circuit and close the inverter switch quickly,otherwise,the semiconductor device may be damaged by over current(voltage);3)during fault current limiter working in current limiting mode to short circuit loop being shut off by relay protection device,the inverter switch will bear the full fault current and oscillation current.If using semiconductor device as inverter switch,the capacity of semiconductor device must be chosen according to the working condition.

The realization of Intelligent fault simulation system for transformer substation

Application of intelligence decision to load flow calculation of substation simulation system

Modeling and Simulation of Power System's Coupled Parallel Transmission Lines

Research on cooperative method in distributed problem solving

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Design and Realization of HMM-based Power Transformer Fault Diagnosis System Software

Simulation Analysis of Transformer Short Circuit Fault

Application Research of Multi-site Smart Substation Based on Digital and Physical Simulation Technology.

A new virtual relay protection simulation system of substation based on IEC61850 standard

Research and application of electronic transformer fault diagnosis

Development of relay protective action simulation software

Design and Implementation of New Generation Substation Secondary Simulation Automatic Test System.

Modeling and Simulation of Transformer Inter-Turn Short-Circuit Faults Based on Field-Circuit Coupling

A 400-V/50-kva Digital–Physical Hybrid Real-Time Simulation Platform for Power Systems

A TRANSIENT SELF-ADAPTIVE SIMULATION ANALYSIS OF THE CENTRAL CHINA POWER SYSTEM

Single-Ended Fault Location for Hybrid Transmission Line Using Embedded Artificial Intelligence

Fault Analysis And Simulation Of Ground-Fault Accident On Transformer In 500 Kv Ac/Dc Grids

Relay protection simulation software of DC traction power system of urban rail transit

Simulation Study of Series Resonance Type Fault Current Limiter

THE CFD SIMULATION RESEARCH ON HYDRAULIC TRANSFORMER

The Technical Features and the Architecture Design of Software for the Troubleshooting Simulation of Distribution Automation and Training Systems