Discussion on Local Spark Sintering of a Ceramic-Metal System in an SR-CT Experiment During Microwave Processing.
Yongcun Li,Feng Xu,Xiaofang Hu,Bo Dong,Yunbo Luan,Yu Xiao
DOI: https://doi.org/10.3390/ma9030132
IF: 3.4
2016-01-01
Materials
Abstract:In this paper, local spark sintering of a ceramic-metal system (SiO2-Sn) during microwave processing was examinedby means of synchrotron-radiation-computed tomography technology. From the reconstructed 3-D and cross-section images of the specimen, adensification process was observed below the melting point of Sn, and then the specimen came into a rapid densification stage. These results may be due to the local spark sintering induced by the high-frequency alternating microwave electric fields. As the metallic particles Sn were introduced, the microstructure of ceramic-metal will lead to a non-uniform distribution and micro-focusing effect from electric fields in some regions (e.g., the neck). This will result in high-intensity electric fields and then induce rapid spark sintering within the micro-region. However, in the subsequent stage, the densification rate declined even when the specimen was not dense enough. The explanation for this is that as the liquid Sn permeated the gaps between SiO2, the specimen became dense and the micro-focusing effect of electric fields decreased. This may result in the decrease or disappearance of spark sintering. These results will contribute to the understanding of microwave sintering mechanisms and the improvement of microwave processing methods.