A New Type of Ceramic Sintering Apparatus Using Microwave-Heating

YL TIAN,BS LI,JL SHI,KZ SONG,JK GUO,JL TAO

1991-01-01

Chinese Science Bulletin

Abstract:, etc., are the most commonly used in laboratories. The first commercial product of high power microwave sintering equipment has already aooeared in the market now Bv adonting and modifying the latest

What problem does this paper attempt to address?

Microwave Sintering Of Thermistor Ceramics

Aimin Chang,Huimin Zhang,Qing Zhao,Bo Zhang

DOI: https://doi.org/10.5772/34517

2012-01-01

Abstract:Microwave sintering is a new sintering technology developed in the middle to late period of the 1980’s, which is characterized by fast densification for ceramic materials[1]. In recent years, microwave heating has been well employed in the field of sintering and joining of ceramics as a result of its advantages against conventional methods. These ceramic materials include oxides, mixed oxides, non-oxides, composite ceramics, etc[2]. In addition, because ceramics have low thermal conductivities and are processed at high temperatures, many researchers have attempted to take advantage of volumetric heating for sintering, chemical vapor infiltration (CVI), and pyrolysis of polymeric precursors[3]. Now it has been found that the microwave sintering can also be applied as efficiently and effectively to thermistor ceramics as well as many other ceramics. This chapter compares advantages of microwave sintering with conventional sintering and presents some applications in thermistor ceramics.
Development and Technology of Microwave Sintering of Special Ceramics

朱佑念,杨超,张晓东,杨军,王雄

DOI: https://doi.org/10.3969/j.issn.1006-2874.2012.06.009

2012-01-01

Abstract:In this paper, the principles and characteristics of microwave sintering for ceramics are introduced, the latest researches on microwave sintering of special ceramics comprehensively reviewed, and the prospects of microwave sintering technology applied in special ceramics anticipated.
[Microwave sintering of nanometer powder of alumina and zirconia-based dental ceramics]

Yi-Fan Chen,Dong-Mei Lu,Qian-Bing Wan,Yong Jin,Ju-Mu Zhu

Abstract:Objective: The objective of the present study was to investigate the feasibility and reliability of sintering alumina and zirconia-based all-ceramic materials through a recently introduced microwave heating technique. The variation of crystal phases, the growth of grain sizes and microstructural features of these materials were evaluated after sintering. Methods: Four different groups of powder (l00%Al2O3, 60%Al2O3+40%ZrO2, 40% Al2O3+60%ZrO2, 100% ZrO2) were respectively press-compacted to fabricate green disk samples, 5 specimen of each group were prepared. All the samples were surrounded by refractory materials for heat containment and processed at 1 600 degrees C in a domestic microwave oven (850 W, 2 450 MHz), 1 600 degrees C/5 min for heating rate, 10 min for holding time. After sintering, the phase composition and average grain size of these ceramics were examined using X-ray diffraction (XRD). Their microstructure characteristics were studied by scanning electron microscopy (SEM). Results: All the specimens were successfully sintered with the application of microwave heating system in combination with a suitable thermal insulator. No phase change was found in alumina while monoclinic-zirconia was found to be transformed to tetragonal-zirconia. A little grain size growth of Al2O3 and ZrO2 has been observed with Al2O3 24.1 nm/before and 51.8 nm/after; ZrO2 25.3 nm/before and 29.7 nm/after. The SEM photos indicated that the microwave-sintered Al2O3-ZrO2 ceramics had a uniform crystal distribution and their crystal sizes could be maintained within the range of nanometers. Conclusion: It is expected that in the near future microwave heating system could be a promising substitute for conventional processing methods due to its unparalled advantages, including more rapid heating rate, shortened sintering time, superfine grain size, improved microstructure and much less expensive equipment.
The Development of a Novel SR-CT Technique-Originated Equipment for Microwave Sintering

Yongcun Li,Feng Xu,Xiaofang Hu,Hongyan Qu,Zhong Zhang,Tiqiao Xiao

DOI: https://doi.org/10.1016/j.proeng.2010.11.011

2010-01-01

Procedia Engineering

Abstract:Microwave sintering has been paid a considerable amount of attention by researches as a novel technology for the preparation of dense structural ceramics recently. However, the mature theory has not been established due to the technical difficulties. Synchrotron Radiation X-ray Computed Tomography (SR-CT) technique is a latest nondestructive detection technology. Applying the SR-CT technology on the research of microwave sintering can realize the observation of the evolution of microstructure under microwave and high-temperature field in a nondestructive, 3D and real-time way, provide more accurate experiment data for revealing the kinetics mechanism, and offer direct foundation for establishing the theory of microwave sintering. But due to the high requirements of experiment skills, it is difficult to apply the SR-CT technique into the in-situ observation of the microstructure evolution process during microwave sintering. Especially, duo to the restriction of SR-CT experiment platform, to design a microwave sintering equipment is quite a big problem. In this paper, according to the analysis of the requirements of SR-CT technique and the restriction of SR-CT experiment platform, the corresponding solutions for these difficulties such as separated structure arrangement, two-ply heat insulation and high precise rotation device were put forward, and a microwave sintering furnace exclusively to SR-CT experiment was designed. The testing on the heat insulation structure and the precision calibration of the rotation device was conducted, the results show that the heat insulation effect is good and the rotation precise achieves the required standard. Besides, depending on this equipment, the first observation of the microstructure evolution of SiC during microwave sintering was carried out, and a few sintering phenomena during three sintering stages were clearly observed. The experiment results indicate that the all the specifications of the equipment meet the design requirements.
Preparation the Porous Ceramic for Flue Gas Adsorption by Microwave Treatment of Industrial Waste

Junhong Zhang,Zhijun He,Chen Tian,Qing Guo,Guojian Hu,Wenlong Zhan

DOI: https://doi.org/10.2109/jcersj2.20025

2020-01-01

Journal of the Ceramic Society of Japan

Abstract:In this paper, the influence of different microwave conditions on industrial waste residue was studied. It is hoped that the porous ceramic materials which can absorb SO2 and NOx in flue gas efficiently can be prepared by using these industrial waste residues. The results show that microwave treatment can effectively improve the activity of industrial waste residue and the adsorption capacity of flue gas. And the appropriate microwave sintering power and sintering time can improve the specific surface area and pore size of adsorbent, and enhance the adsorption capacity of flue gas. Under the experimental conditions, the best microwave sintering conditions are sintering power 1000 W and sintering time 1200 s. Under these conditions, the porous ceramic adsorbent has the best adsorption effect, with the desulfurization rate of 98.8% and the denitration rate of 91.9%.
Microwave Sintering of Ce-Y-Zta Composites

ZP Xie,Y Huang,R Zhang,JL Yang,SH Wang

1997-01-01

American ceramic society bulletin

Abstract:Microwave processing of ceramic materials--especially the sintering of Al{sub 2}O{sub 3}, ZrO{sub 2} and their composites--has been investigated during the past decade by many researchers. Electromagnetic waves interact with ceramic materials, leading to volumetric heating by dielectric loss. This enhances the sintering process and decreases sintering active energy and densification temperature. Microwave heating also has the potential for energy and cost savings when compared with conventional heating. Zirconia-toughened alumina (ZTA) has received attention for its rapid densification in a microwave furnace. This article examines the batch microwave sintering of ZTA--30 wt% ceria-yttria-stabilized tetragonal zirconia polycrystals (Ce-Y-TZP) + 70 wt% Al{sub 2}O{sub 3}--including: (1) the microwave process in a multimode cavity with a hybrid heating structure; (2) the flexural strength, fracture toughness and wear resistance of the microwave-sintered materials; (3) the relationship between sintering temperature and microstructure/mechanical properties of the sintered samples; and (4) the comparison between microwave-sintered and conventionally sintered materials.
Microwave sintering of complex shapes: From multiphysics simulation to improvements of process scalability

Charles Manière,Shirley Chan,Eugene A. Olevsky

DOI: https://doi.org/10.48550/arXiv.2011.12404

2020-11-21

Materials Science

Abstract:The microwave sintering homogeneity of large and complex shape specimens is analyzed. A new approach enabling the fabrication of complex shapes ceramics via 3D printing and microwave sintering is presented. The use of a dental microwave cavity is shown to enable a substantial level of densification of complex shape components while restricting the grain growth. The homogeneity of the processed samples during microwave sintering is studied by an electromagnetic-thermal-mechanical simulation. The realistic densification behavior, that phenomenologically takes into account the microwave effect, is included in the modeling framework. The simulation indicates the sharp correlation between the microwave field distribution in the cavity, the temperature profile, and the specimen's shape distortion.
In situ investigation of SiC powder’s microwave sintering by SR-CT technique

YongCun Li,Feng Xu,XiaoFang Hu,HongYan Qu,Hong Miao,Zhong Zhang,TiQiao Xiao

DOI: https://doi.org/10.1007/s11431-011-4405-1

2011-01-01

Science China Technological Sciences

Abstract:Microwave sintering is being developed as a novel technique for the preparation of dense structural ceramics, but the mature theory has not been established due to the technical difficulties. The synchrotron radiation X-ray computed tomography (SR-CT) technique was introduced for the first time into the study of microwave sintering to in-situ observe the microstructure evolution of silicon carbide (SiC) material in this paper. By applying the SR-CT technique, the reconstructed 2D and 3D images of the specimen were obtained and the double logarithm curve of mean neck size and time (Ln( x )-Ln( t )) were obtained from these reconstructed images. Various sintering phenomena including sintering neck growth during microwave treatment were observed from the reconstructed images. Furthermore, the differences in microstructure evolution and sintering kinetics between microwave and conventional sintering were analyzed based on the reconstructed images and the Ln( x )-Ln( t ) curve. 1) The sharp surface of grains near the contact region distinctly grew blunt and the sintering neck growth between these grains were obviously observed at the early stage. Besides, the larger particles grew faster than smaller ones. The main reason for these phenomena may be the micro-focusing effect of electric fields. 2) During each of the three sintering stages, the sintering kinetics curve of double logarithm relationship between mean neck size and time shows a good linear relationship, but at the middle stage the slope of the curve increases dramatically, which is quite larger than conventional sintering. The preliminary interpretation for these extraordinary phenomena has been discussed in details.
3D Printing of High Performance Low Temperature Sintered Ceramic Substrates for Microwave Applications

Darren Cadman,Sinan El-Faouri,Da‐Wei Wang,George Chi‐Tangyie,Avishek Ghosh,Annapoorani Ketharam,Reza Gheisari,Athanasios Goulas,C. Lee,Thomas Whittaker,Shiyu Zhang,Ian M. Reaney,Vaidhy Vaidhyanathan,Paul Conway,Daniel S. Engstrøm,William G. Whittow,J.C. Vardaxoglou

2018-01-01

Abstract:3D printing of high performance low temperature sintered ceramic substrates for microwave applications
A general method to synthesize and sinter bulk ceramics in seconds

Chengwei Wang,Weiwei Ping,Qiang Bai,Huachen Cui,Ryan Hensleigh,Ruiliu Wang,Alexandra H Brozena,Zhenpeng Xu,Jiaqi Dai,Yong Pei,Chaolun Zheng,Glenn Pastel,Jinlong Gao,Xizheng Wang,Howard Wang,Ji-Cheng Zhao,Bao Yang,Xiaoyu Rayne Zheng,Jian Luo,Yifei Mo,Bruce Dunn,Liangbing Hu,Alexandra H. Brozena,Xiaoyu (Rayne) Zheng

DOI: https://doi.org/10.1126/science.aaz7681

IF: 56.9

2020-05-01

Science

Abstract:Speedy ceramic sintering Synthesizing ceramics can require heating for long times at high temperatures, making the screening of high-through-put materials challenging. C. Wang et al. developed a new ceramic-sintering technique that uses resistive heating of thin carbon strips to ramp up and ramp down temperature quickly. This method allows for the quick synthesis of a wide variety of ceramics while mitigating the loss of volatile elements. Ultrafast sintering is ideal for synthesizing many compositions to screen for ideal properties for a variety of applications, including the development of new solid-state electrolytes. Science , this issue p. 521

multidisciplinary sciences
Study of Mechanism of Kaolin Sintered by Microwave Heating

ZHONG Sheng-liang,ZHANG Mai-sheng,SU Qiang

DOI: https://doi.org/10.3321/j.issn:0529-6579.2005.03.018

2005-01-01

Abstract:Mechanism of kaolin sintered by microwave heating was investigated. The results showed that phase transformation of kaolin sintered by microwave heating is the same with that by conventional heating. It transformed from crystalline kaolin to amorphous metakaolin, and became crystalline mullite in the last. However, the phase transformation rate was higher by 4～12 times than that of the conventional heating and the phase transformation temperature decreased by about 200 ℃. Moreover, the average particle size of the product was smaller. SEM results showed that both the crystal shape of the products obtained by microwave heating and conventional heating were mainly sheet, but the product of microwave heating was much more smooth.The whiteness of the products obtained by microwave heating is similar with that of conventional heating.
Making the Case for Scaling up Microwave Sintering of Ceramics

Bashu Aman,Sampada Acharya,B. Reeja-Jayan

DOI: https://doi.org/10.1002/adem.202302065

IF: 3.6

2024-03-04

Advanced Engineering Materials

Abstract:The densification and sintering of ceramics using microwaves was first reported in the mid‐1960s. Today, the reduced carbon footprint of this process has renewed interest as it uses less energy overall compared to conventional process heating/furnaces. However, scaling‐up and commercializing the microwave sintering process of ceramics remains a formidable challenge. As a contactless method, microwave sintering offers geometric flexibility over other field‐assisted sintering processes. Yet, the inability to address multi‐scale, multi‐physics‐driven heterogeneities arising during microwave coupling limits discussions about a future scale‐up process. We make the case here that unlike 60 years ago, new advances in multiscale computational modeling, materials characterization, control systems and software open up new avenues for addressing these challenges. More importantly, the rise of additive manufacturing techniques demands the innovation of sintering processes in the ceramics community for realizing near‐net‐shaped and complex parts for applications ranging from medical implants to automotive and aerospace parts. This article is protected by copyright. All rights reserved.

materials science, multidisciplinary
In Situ Investigation on the Mixed-Interaction Mechanisms in the Metal–ceramic System’s Microwave Sintering

Y. C. Li,F. Xu,X. F. Hu,D. Kang,T. Q. Xiao,X. P. Wu

DOI: https://doi.org/10.1016/j.actamat.2013.11.017

IF: 9.4

2014-01-01

Acta Materialia

Abstract:In situ investigation of the microstructure evolution and the mixed-interaction mechanisms of metal–ceramic materials during the microwave sintering process was carried out using the synchrotron radiation computed tomography technique. The results indicate that there are some special mixed-interaction mechanisms, which may promote the sintering process during the microwave heating of metal–ceramic materials. In the experiment, some particular sintering phenomena that differ from the microwave sintering of pure metal materials were observed, such as fast interface bonding and particle swallowing. Quantitative analysis of the microstructure evolution during microwave sintering showed that the decrement of grain surface bending energy of metal–ceramic materials was slower, while the sintering-neck growth rate was higher than that of the pure metal materials. These results may be caused by the mixed-interaction mechanisms between microwave and metal–ceramic materials, such as the “micro-focusing effect”, the special microwave interaction mechanisms on the particle surface and the heterogeneous metal–ceramic interface. This study will help to provide a useful reference for the improvement of the microstructure characteristics of metal–ceramic materials in microwave sintering.
Microwave sintering of Ce-Y-ZTA composite

Zhipeng Xie,Jianbao Li,Rui Zhang,Yong Huang

1998-01-01

Abstract:The batch sintering process and resultant mechanical properties of Ce-Y-ZTA composite are studied by using rectangular multimode microwave oven. The fast ceramic sintering with high stability and repetition could be realized by controlling heating profile and improving hybrid heating structure. Small grain size and homogeneous microstructure could be observed after sintering. Also high bending strength and fracture toughness are obtained.
Simultaneous sintering and joining of ceramic materials by microwave

Xiangyu Bai,Anli Lu,Sujuan Wu,Zhipeng Cai

1998-01-01

Abstract:Simultaneous sintering and joining of ZTA (Al2O3 + 20 wt% ZrO2) and 2.7 mol% yttria zirconia (Y-TZP) by microwave and conventional heating was conducted. Densities of ZTA and Y-TZP were determined by the Archimedes method, and their joining strengthens were evaluated by performing shear tests using a thermal-mechanical simulation machine (Gleeble-1500). Microstructures were observed using scanning electron microscopy (SEM). It was found that simultaneous sintering and joining could be completed successfully by microwave. The microwave heating was characterized by more rapid and harmonious densification, finer and more uniform grain size and higher joining strength compared to the conventional method.
Microwave joining 95-Al2O3 ceramics using nano-Si powders as the interlayer

Shun Li,Jiachen Liu,Zijun Hu,Wei Fan

2008-01-01

Abstract:Making use of the features of volumetric heating, good heating uniformity, fast heating speed and heating in selectivity etc., the microwave heating technique was used to 95-join Al2O3 to Al2O3 using the nanometer Si powders as the interlayer. The effects of the microwave power, sintering time and the microwave joining assembly on the joining interface were studied. The phase transformation in the interlayer was analyzed by X-ray diffraction (XRD) and the morphology near the interface was observed using the environment scanning electron microscopy (ESEM).
Sintering of Titanium in Vacuum by Microwave Radiation

S. D. Luo,M. Yan,G. B. Schaffer,M. Qian

DOI: https://doi.org/10.1007/s11661-011-0645-8

2011-01-01

Metallurgical and Materials Transactions A

Abstract:The effectiveness of microwave (MW) sintering has been demonstrated on many ceramic systems, a number of metallic systems, and metal-ceramic composites, but remains ambiguous for Ti powder materials. This work presents a detailed comparative study of MW and conventional sintering of Ti powder compacts in vacuum. It is shown that MW radiation is effective in heating Ti powder compacts with the assistance of MW susceptors; it delivered an average heating rate of 34 K/min (34 °C/min), compared to 4 K/min (4 °C/min) by conventional vacuum heating in an alumina-tube furnace. Microwave radiation resulted in similar densification with well-developed sinter bonds. However, MW-sintered samples showed higher bulk hardness, a harder surface shell, and coarser grains. The difference in hardness is attributed to the difference in the oxygen content, supported by X-ray photoelectron spectroscopy analyses. The mechanisms of MW heating for metal powder compacts are discussed in the context of the sintering of Ti powder materials and attributed to three combined effects. These include heat radiation from the MW susceptors at low temperatures, enhanced MW absorption due to the transformation of the TiO2 film on each Ti powder particle to oxygen-deficient Ti oxides, which are MW absorbers; and the volumetric heating of Ti powder particles by eddy currents.
Phase Transformation and Heating Behaviors of Iron-Based Ceramic Powders in A Single-Mode Microwave Applicator

Song Li,Guoqiang Xie,Dmitri V. Louzguine-Luzgin,Ziping Cao,Noboru Yoshikawa,Motoyasu Sato,Akihisa Inoue

DOI: https://doi.org/10.1016/j.jallcom.2008.09.046

IF: 6.2

2009-01-01

Journal of Alloys and Compounds

Abstract:The application of microwave radiation for heating iron-based ceramic and elemental blend powders was performed in a single-mode microwave applicator. The heating behaviors and phase transformations of these powders by microwave radiation in a separated electric-field and magnetic-field were investigated. These powders could be heated up more easily in a magnetic-field than in electric-field. Microwave heating of iron and iron boride blend powders induced the formation of Fe2B and Fe3B phases. The phenomenon of decomposition was confirmed and only α-Fe phase could be observed after microwave heating of Fe3C powder both in an electric- and magnetic-fields.
Cold sintering of microwave dielectric ceramics and devices

Dawei Wang,Linhao Li,Juan Jiang,Zhilun Lu,Ge Wang,Kaixin Song,Di Zhou,Ian M. Reaney

DOI: https://doi.org/10.1557/s43578-020-00029-w

IF: 2.7

2021-01-13

Journal of Materials Research

Abstract:Abstract Microwave (MW) dielectric ceramics are used in numerous electronic components for modern wireless communication systems, including antennas, resonators, capacitors and filters. However, to date, MW ceramics are manufactured by an energy-intensive, conventional high-temperature (> 1000 °C) sintering technology and thus cannot be co-sintered with low melting point and base electrodes (Ag, Al, etc., < 1000 °C), nor directly integrated with polymers (< 200 °C). Cold sintering is able to densify ceramics at < 200 °C via a combination of external pressure and a transient liquid phase, reducing the energy consumed and facilitating greater integration with dissimilar materials. This review outlines the basics of MW ceramics alongside the mechanism of cold sintering. Recent developments in cold sintering of MW ceramics, composites and devices are described, emphasizing new materials and progress towards component/device fabrication. Future prospects and critical issues for advancing cold-sintered MW materials and devices, such as unclear mechanism, low Q × f values and poor mechanical properties, are discussed. Graphic abstract

materials science, multidisciplinary
System and Experiment Study for Millimeter Wave Sintering of Ceramics

Jirun Luo,Yeu Su,Shichang Zhang,Yaogen Ding,Wei Song,Wei Pan,Zhuo Zhang

DOI: https://doi.org/10.1109/icimw.2000.893088

2002-01-01

Abstract:A pulsed gyrotron-based system has been set up in order to investigate millimeter wave sintering of ceramics. This paper describes the facility, including the gyrotron, propagation system, work chamber, and control system. An initial experiment on ceramic sintering has been completed for 98%Al/sub 2/O/sub 3/+1%SiO/sub 2/+1%MgO samples with the facility, which shows that 93.45% theoretical density can be reached for a sintering temperature of 1150/spl deg/C for 30 minutes.

A New Type of Ceramic Sintering Apparatus Using Microwave-Heating

Microwave Sintering Of Thermistor Ceramics

Development and Technology of Microwave Sintering of Special Ceramics

[Microwave sintering of nanometer powder of alumina and zirconia-based dental ceramics]

The Development of a Novel SR-CT Technique-Originated Equipment for Microwave Sintering

Preparation the Porous Ceramic for Flue Gas Adsorption by Microwave Treatment of Industrial Waste

Microwave Sintering of Ce-Y-Zta Composites

Microwave sintering of complex shapes: From multiphysics simulation to improvements of process scalability

In situ investigation of SiC powder’s microwave sintering by SR-CT technique

3D Printing of High Performance Low Temperature Sintered Ceramic Substrates for Microwave Applications

A general method to synthesize and sinter bulk ceramics in seconds

Study of Mechanism of Kaolin Sintered by Microwave Heating

Making the Case for Scaling up Microwave Sintering of Ceramics

In Situ Investigation on the Mixed-Interaction Mechanisms in the Metal–ceramic System’s Microwave Sintering

Microwave sintering of Ce-Y-ZTA composite

Simultaneous sintering and joining of ceramic materials by microwave

Microwave joining 95-Al2O3 ceramics using nano-Si powders as the interlayer

Sintering of Titanium in Vacuum by Microwave Radiation

Phase Transformation and Heating Behaviors of Iron-Based Ceramic Powders in A Single-Mode Microwave Applicator

Cold sintering of microwave dielectric ceramics and devices

System and Experiment Study for Millimeter Wave Sintering of Ceramics