Abstract:In this study, the in-situ compatibilization reaction between recycled acrylonitrile-butadiene-styrene copolymer (rABS) and functional styrene-ethylene-butylene-styrene block maleic anhydride (SEBS-g-MAH) was confirmed, which contributed to the toughening phenomenon of rABS, especially the notched impact strength. As mechanical test that manifested, the rABS/SEBS-g-MAH blends are stronger and more ductile than the rABS/SEBS blends. Prominently, the former has great advantage over the latter in terms of improving the impact performance. Scanning electron microscope (SEM) images showed that the compatible segments that were generated by reaction not only improve the interface adhesion of rABS/SEBS-g-MAH blends but also promote the evolution of co-continuous structures, which can be evidently observed after etching. Furthermore, the SEM micrographs of tensile fracture surfaces indicated that the formation of the co-continuous phase and the improvement of interface adhesion are the most profound reasons for the excellent tensile properties of the rABS/SEBS-g-MAH blends. The impact fracture surface revealed that two-phase interface affects crack propagation and shear yielding absorbs more impact energy than simple interface debonding does at higher deformation rates. Meanwhile, rheological analysis demonstrated that the complex viscosity of the rABS/SEBS-g-MAH (80/20 wt%) blend with a co-continuous structure exhibits a maximum positive deviation at low frequencies from the theoretical value calculated using the rule of logarithmic sum, which indicated a connection between co-continuous structure and complex viscosity. In addition, the storage modulus vs. loss modulus curves of the blends revealed that the viscoelastic behavior of rABS/SEBS-g-MAH blends is very similar to that of rABS.

Study on Processability and Mechanical Properties of SEBS/HDPE Blend

Well-Defined Pe-B-Pdms Diblock Copolymers Via The Combination Of Thiol-Ene Click And Esterification Reactions: Facile Synthesis And Compatibilization For Hdpe/Silicone Oil Blends

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Recycled Polypropylene/SEBS Polyblends: Manufacture and Mechanical Property Evaluation

Morphology and Mechanical Properties of Styrene–ethylene/butylene–styrene Triblock Copolymer/high‐density Polyethylene Composites

Effect of Compatibilizer Content on the Tensile Properties and Fracture Toughness of High Density Polyethylene/Polystyrene Blends

Impact and Tensile Properties of SEBS Copolymer Compatibilized PS/HDPE Blends

Polystyrene/High Density Polyethylene Blends Compatibilized by a Tri-Block Copolymer I. Properties and Morphology

Morphology and Properties of SEBS Block Copolymer Compatibilized PS/HDPE Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Injection molding and shear‐induced stress simulation of poly (styrene‐ethylene‐butylene‐styrene) and polypropylene blends

STUDY ON RHEOLOGICAL BEHAVIOR OF POLYPROPYLENE/MODIFIED POLYESTER BLENDING SYSTEM

Mechanical And Rheological Properties Of Lldpe/Hdpe, Lldpe/Eva Blends

Recycled poly(ethylene terephthalate)/linear low-density polyethylene blends through physical processing

Effects of different types of polyethylene on the morphology and properties of recycled poly(ethylene terephthalate)/polyethylene compatibilized blends

Blends of rABS and SEBS: Influence of In-Situ Compatibilization on the Mechanical Properties

Dynamic Rheological Behavior of Hdpe/Uhmwpe Blends

Rheological and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene/high Density Polyethylene/polyethylene Glycol Blends

Polystyrene/High Density Polyethylene Blends Compatibilized by Tri-Block Copolymer II. Toughening and Deformation Mechanisms

Study on properties of HDPE/LLDPE/POE blown films

Effect of SEBS-g-MA on Properties and Structure of R-PET/LLDPE Blends