Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Finite Element Analysis of the Pipe-through Welded Ball Joints

Elastic Finite Element Analyses and Experiment Research on Welded Spherical Joints with Square Hollow Sections

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints with Square Steel Tubes Subjected to Combined Axial Forces and Biaxial Bending Moments

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints Connected with Square Steel Tubes

Simplified theoretical solution and practical calculation method for welded hollow spherical joints of rectangular hollow section members

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Design and Finite Element Analysis of High Efficiency and High Precision Centering Device for Ship Pipe Welding

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes

Nonlinear Analysis on Ultimate Flexural Bearing Capacity of the N-Shaped Steel Tubular Joints

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Non-Linear Analysis of Ultimate Loading Capacity of Cast Tubular Y-Joints under Axial Loading

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Non-linear Analysis on Axially Loaded Cast Tubular T-joints Including the Effects of Fillet Parameter

Non-linear Analysis on Cast Tubular T-joint Loaded by In-Plane Bending

Nonlinear Analysis for the Bearing Properties of Multiplanar Tubular Joints with Square and Circular Hollow Sections

Safety analysis of pressure piping containing incomplete penetration under combined loads