Development of Fuel Cell System Using Metal Hydride and Hydrogen Peroxide in Low-Oxygen Environments
Hyungjun Cheon,Dongmin Kim,Sinwoo Choi,Bongjae Lee,Heesook Roh,Joongmyeon Bae
DOI: https://doi.org/10.1149/ma2023-01552696mtgabs
2023-08-28
ECS Meeting Abstracts
Abstract:Hydrogen energy is attracting attention as a promising power system due to high energy storage density and environmentally friendly features. For these reasons, fuel cell system using hydrogen energy in unmanned underwater vehicles have been studied. However, in low-oxygen environment, fuel cell system requires an oxygen storage as well as a hydrogen storage. In this study, a fuel cell system using a metal hydride and hydrogen peroxide was designed. The metal hydride can charge and discharge hydrogen at a lower pressure than a high-pressure hydrogen tank and has a high hydrogen storage density. In this system, AB 2 type metal hydride is used to store hydrogen. Hydrogen desorption reaction of the metal hydride is an endothermic reaction, and heat supply is required to maintain the temperature of the metal hydride in order to stably supply hydrogen. Therefore, in this system, hydrogen peroxide was used as an oxygen source. Hydrogen peroxide reacts with a metal catalyst to generate oxygen and water. The decomposition reaction of hydrogen peroxide is an exothermic reaction and can supply heat required for the metal hydride. In this system, hydrogen peroxide is decomposed into water and oxygen through a catalytic reaction, and the generated heat is supplied to the metal hydride. Finally, hydrogen and oxygen are supplied to the PEMFC stack to generate power. For system design, in this study, PCT characteristics of AB 2 type metal hydride, thermal management method, and hydrogen peroxide decomposition catalyst were studied, and an operation strategy for non-humidified PEMFC operation was proposed. This system generated a power output of about 290 W for 97 hours, and the hydrogen utilization rate of the fuel cell was confirmed to be 92.3%.