Abstract:The cadmium sulfide (CdS) n-type semiconductor is one of the most used as a window layer in thin-film solar cells, such as CdTe, CIS, CIGS, and CZTS. Optoelectronic properties are the most important characteristics for window materials. CdS thin films obtained using the chemical bath deposition technique (CBD) have been reported; however, large amounts of precursor solutions are used, which generate considerable amounts of toxic waste. The aim of this work is to reduce the amount of precursor solutions used for CdS growth; for this, it is necessary to consider an efficient position for the substrate inside the reactor container and at the same time allow obtaining CdS thin films with adequate physical properties to be applied in the photovoltaic solar cell development. CdS thin films were deposited on soda-lime/SnO2:F substrates (FTO) using the CBD technique; the substrates were placed in three different arrangements [rack system, step system (up), and step system (down)]. CdS samples with areas of 4 cm2 and a thickness of 27-48 nm were obtained; the X-ray diffraction patterns show CdS thin films with different polycrystalline structures. The morphological measurements reveal different surface formations depending on the substrate position, and resistivity values of around 105 Ω*cm were measured. UV-vis spectra show transmittance values of around 45-94% in the visible region with band gap energy values of around 2.1-2.36 eV. The best physical properties of CdS thin films and an efficient CBD process were obtained when the FTO substrates were located near the bottom of the reactor container with the FTO side down, leading to an optimal configuration that allows reducing the amount of precursor solutions and in this way reduces the toxic waste generated. These results are important in the photovoltaic technology process and environmental impact.

Preparation of CdS Films and Their Application in CdTe Solar Cells

An Optimized Multilayer Structure of CdS Layer for CdTe Solar Cells Application

[Research on the Polycrystalline CdS Thin Films Prepared by Close-Spaced Sublimation].

The role of O2 in CdSeTe thin film deposition and CdSeTe/CdTe solar cell performance

Preparation and properties of CdS thin films with large area

The study on saturation current and ideality factor of CdTe solar cell based on CdS window layer deposited with hydrogen peroxide

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

Strategy for Performance Enhancement of Cd1-XZnXTe/CdS Core/shell Quantum Dot Sensitized Solar Cells Through Band Adjustment

Microwave Assisted Cdse Quantum Dot Deposition on Tio2 Films for Dye-Sensitized Solar Cells

Preparation and Optimization of All-Inorganic CdSe/ZnTe Solar Cells

Analysis of electrical property parameters of CdS/CdTe solar cells fabricated by close space-sublimation

CdTe thin film solar cells with a SnTe buffer layer in back contact

In-situ Growth of a CdS Window Layer by Vacuum Thermal Evaporation for CIGS Thin Film Solar Cell Applications

Cu-doped CdS and its application in CdTe thin film solar cell

Comprehensive Analysis of CdS Ultrathin Films Modified by the Substrate Position inside the Reactor Container Using the CBD Technique

Cds/Cdse Co-Sensitized Solar Cell Prepared by Jointly Using Successive Ion Layer Absorption and Reaction Method and Chemical Bath Deposition Process

Pre-deposition of CdS layers to improve the diode quality of CZTSSe solar cells

Influence of deposition time in CdTe thin film properties grown by Close-Spaced Sublimation (CSS) for photovoltaic application

Study on the Aqueous CdTe Quantum Dots Solar Device Deposited by Blade Coating on Magnesium Zinc Oxide Window Layer

Electrodeposition of CdTe Thin Films for Solar Energy Water Splitting.

Solution-Processed Efficient Nanocrystal Solar Cells Based On Cdte And Cds Nanocrystals