Abstract:This paper deals with the actuator movement measurement for objective lens actuator in optical pickup. An optical pick-up is an optical apparatus to record and/or reproduce information from an optical disc, and move in a radial direction on the optical disc. The objective lens actuator helps move an objective lens in a tracking direction, a focusing direction, and/or a tilting direction, spot the laser beam on a correct portion of the optical disc. It basically carries out tracking and focusing movements, i.e., a biaxial movement. For high recording density media, the optical pickup actuator requires a triaxial or quadriaxial movement including a tilting movement in addition to the existing biaxial movement. For information recording and/or reproducing correctly, the movement range of the actuator should be proper to accurately follow the disc deviation. Alternative methods of movement measurement have been proposed. One method employed now uses a plane plate reflecting laser beam which describes the movement. It requires two laser devices for tracking direction and the focusing direction measurement respectively. Here we propose a method for describing the tracking and focusing movements on one laser device. In this method an external cone is used, with the same weight as the objective lens. It could reflect laser beam back to the linear CCD. The diameter of the external cone base is equal to that of the objective, which is crucial for a stable placement. The ratio of height to width of the external cone is designed and optimized, so that to satisfy the accuracy of the movement measurement and minimize the device. Measurement with this method has proved satisfactory for certain CD/DVD optical pickup.

Influence of Optical Pick-up Assembly Error on Tracking Signal

Analysis of the influence of photo detector integrated circuit position error on differential phase detection signal

Three-dimensional Dynamic Non-Contact Attitude Detection System Based on Optical Path Deflection Technology

Analysis of Cross Talk Between Radial Tilt Error and Tracking Error Signal of A High-Density Digital Disk

Analysis of Crosstalk Between Radial Tilt Error and Tracking Error Signal of Optical Disc System

A New Optical Angle Measurement and Compensation

Optimal Control Algorithm for Optical Path Scanning Control System Based on Relative Performance Error

Optical Design and accuracy analysis of interferometric star tracker

High-Precision Attitude Angle Measuring System Based on Talbot Interferometry

Influence of Alignment Error and Random Noise on Interferometry Flat Sub-Aperture Stitching

Analysis of Crosstalk Between Radial Tilt Error and Tracking Error in Tracking Servo of Blue-Ray Disc

Analysis of the Subdivision Errors of Photoelectric Angle Encoders and Improvement of the Tracking Precision of a Telescope Control System

Analysis of the Effects of Disk Tilt on the Differential-Phase-Detection Signal in A High-Density Dvd Read-Only Disk Driver

Study on the Movement Measurement for an Objective Lens Actuator in Optical Pickup

Movement interferences analysis for objective lens actuator in optical disc system

Analysis of Error Sources for Laser Angular Tracking System

Analysis of Movement Cross Interference in Optical Pickup Actuator for High Density and High Speed

Movement Dynamics Analysis for an Optical Pickup Head Lens Actuator in A Digital Versatile Disc System

Design of the servo tracking system for the re-writable optical disk drive

Testing of Optical Disk Axial Run-Out and Tilt

Effect of Angle of Incidence on Self-Mixing Laser Doppler Velocimeter and Optimization of the System