Abstract:Differential phase detection (DPD) and push-pull methods are widely used to generate tracking error signals in reading and writing high-density digital disks. Radial and tangential tilts, which will deteriorate the performance of the servo system, occur while the disk is spinning. Such influences vary with different tracking error generating methods and physical parameters of the disk. An analytic description of the disk diffraction model is obtained by diffraction theory. Disk radial tilt effects on tracking error signal and cross talk of read only and rewriteable disks are simulated and analyzed. A tracking error signal offset caused by radial tilt is 0.06 µm/deg on a DVD-ROM disk using the DPD method, 0.15 µm/deg using the push-pull method, and 0.12 µm/deg (0.10 pitch/deg) using the DPD method on a DVD-RAM disk. The DPD method exhibits better performance than the push-pull method when the disk is tilted on a DVD-RAM disk. The relationship between the tracking error signal offset and the groove depth is obtained in advance. The intertrack cross talk is also analyzed when disk tilt occurs.

Analysis of the Effects of Disk Tilt on the Differential-Phase-Detection Signal in A High-Density Dvd Read-Only Disk Driver

Analysis of Cross Talk Between Radial Tilt Error and Tracking Error Signal of A High-Density Digital Disk

Analysis of the Differential Phase Detection Signal in Multi-level Run-Length Limited Read-Only Disk Driver

Analysis of Crosstalk Between Radial Tilt Error and Tracking Error Signal of Optical Disc System

Analysis of the focus error characteristic in high density optical disk driver

Analysis of Differential Phase Detection Signal of a Novel Multi-Level Read-Only Disc

Novel DPD signal detection method for read-only high density optical disks

Testing of Optical Disk Axial Run-Out and Tilt

A New Detecting Method of Radial Tilt and Plane Vibration of Disk

Analysis of the influence of photo detector integrated circuit position error on differential phase detection signal

New Differential Phase Detection Method for Signal Waveform Modulation Multi-Level Discs

Effects of Pattern Parameters on the Optical Disk Readout Signals

Influence of Optical Pick-up Assembly Error on Tracking Signal

New Radial Tilt Detection Method Using Only One Beam and One Four-Quadrant Detector

Movement Dynamics Analysis for an Optical Pickup Head Lens Actuator in A Digital Versatile Disc System

Validity Analysis of Scalar Diffraction Theory in Optical System of Optical Disk

Tracking Error Detection Method for Novel Multi-Level Discs

Influence of Servo Error on the Readout Signal for a Multi-Level DVD Using Waveform Modulation

Vector Diffraction Analysis of Optical Disk Readout

A Data-Analysis Method Of Dvd Disc Parameters Affected By Replication Process

4-Axis Optical Head Lens Actuator for Disc Tilt Compensation