Abstract:Traditional vibration detecting methods for rotating machines with chambers are of 'inner detecting' method, which installs transducers inside the machine chambers. But this method is heavily confined to maneuverability, safety and massive operations when applied to large scale. Contrary to the traditional methods, "outer detection" method (or non-invasive method) has its advantages. This method uses a certain non-invasive detecting method to measure the vibration and the noise of a machine, thus to obtain information as much as it can without any breakage and modification to the structure.The work described in this paper is aimed at the development of an outer detecting and analyzing system. The system uses a piezoelectric sensor as the detector, a sound card of PC as an A/D converter, a software analyzing system. It has a number of new characteristics: full functions on real-time data processing and recording; automatic fault detection and alert; multi-spectrum extended analysis functions. These mean a simpler detection method, no breakage on machine chambers, high mobility.Some faults examining experiments are completed. Especially the research is done on rotor rubbing, bearing friction and unusual multi-harmonic. Detecting methods of these faults are developed, such as fractal geometry, weight center of frequency, peak tracing and peak searching, etc. Based on the experiments, these detecting and analyzing methods have shown to be of practical use. Other features of the system include less CPU time, very suitable for real-time examinations.It is concluded that even there are many difficulties in rotating machines non-invasive method, we can still obtain some useful results.

A New Detecting Method of Radial Tilt and Plane Vibration of Disk

Three-dimensional Dynamic Non-Contact Attitude Detection System Based on Optical Path Deflection Technology

Analysis of Cross Talk Between Radial Tilt Error and Tracking Error Signal of A High-Density Digital Disk

Testing of Optical Disk Axial Run-Out and Tilt

Analysis of Crosstalk Between Radial Tilt Error and Tracking Error Signal of Optical Disc System

Analysis of the Effects of Disk Tilt on the Differential-Phase-Detection Signal in A High-Density Dvd Read-Only Disk Driver

NON-CONTACT MEASUREMENT TECHNIQUE FOR DYNAMIC RADIAL DEFORMATION OF EXPLOSION CONTAINMENT VESSELS

New Radial Tilt Detection Method Using Only One Beam and One Four-Quadrant Detector

Movement Dynamics Analysis for an Optical Pickup Head Lens Actuator in A Digital Versatile Disc System

Detection method of EF phase difference of DVD optical pickup

4-Axis Optical Head Lens Actuator for Disc Tilt Compensation

Research on the Specific Servo System Applied for DVD Traverse Tester

Near-line inspector of optical disk parameters

Novel DPD signal detection method for read-only high density optical disks

Radial Position Detection Of Five-Phase Bearingless Pm Motor

A Data-Analysis Method Of Dvd Disc Parameters Affected By Replication Process

Measurement And Analysis Of Vibration And Noise Signals Of Rotating Machines By Non-Invasive Method

Study on Vibro-Acoustics of Polyphase, Fractional Slot, Surface Mounted Permanent Magnet Disc Machines

Analysis of Differential Phase Detection Signal of a Novel Multi-Level Read-Only Disc

Early Fault Diagnosis of Rotating Machinery by Combining Differential Rational Spline-Based LMD and K–L Divergence

Multi-dimensional variational mode decomposition for bearing-crack detection in wind turbines with large driving-speed variations