Abstract:The accurate prediction of the elastic modulus of aluminum foam is important for the application in high-tech fields, e.g. in aerospace industry. However, the scaling law based on the Gibson-Ashby model did not achieve the precise prediction of elastic modulus, in absence of complex porous structural features. In this study, we extended the scaling law by introducing the topological and morphological parameters into the multivariate equation. The 3D numerical images of aluminum foam specimens were obtained by X-ray tomography method, and the nine structural parameters were calculated and analyzed. The results show that as the porosity increases from 77% to 91%, the highest frequency of sphericity and solid material thickness of the cellular structure remains practically constant, although the distribution of cell size becomes more dispersed. The edges connections and the Inter-Branches Angle (IBA) of aluminum foam remain unchanged for all the specimens. Seven structural parameters were introduced into the extended scaling law to predict the elastic modulus with a higher residual value R 2 of 0.932, in contrast to the R 2 of 0.702 for the conventional scaling law. Through a stepwise linear regression method, the extended scale method was simplified by removing redundant parameters, and still achieved the elastic modulus predictions with a residual value R 2 of 0.929. The remaining structural parameters in the extended scaling law, i.e. relative density, solid material thickness, and sphericity, were supposed to independently influence the elastic modulus, according to the covariance analysis. The three independent parameters offer the possibility to accurately predict and regulate the mechanical properties of aluminum foam.

An Experimental Study On the Mechanic Behaviors of Aluminum Foam Based on the Relative Current Density

Mechanical Properties of Aluminium Foam and How Density, Temperature, and Strain Rate Affect Dynamic Strain–Stress Relationship

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.

Numerical investigation of influences of porous density and strain-rate effect on dynamical responses of aluminum foam

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Experimental and mesoscopic investigation of double-layer aluminum foam under impact loading

Anisotropic Compressive Behavior of Functionally Density Graded Aluminum Foam Prepared by Controlled Melt Foaming Process

Micro-CT in the mechanical properties and energy absorption of closed-cell aluminium foam

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

Three-dimensional Voronoi-based simulation study of stepwise density-graded aluminum foams: Buffering and energy absorption performance analysis

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Modeling of Macro-Deformation Behavior of Thin-Walled Aluminum Foam by Gas Injection Method

Quantitative relationships between cellular structure parameters and the elastic modulus of aluminum foam

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Dynamic mechanical properties of closed-cell aluminum foams with uniform and graded densities

Microstructure and Compressive Properties of Aluminum Foams Made by 6063 Aluminum Alloy and Pure Aluminum