Abstract:There are many sand-laden waters in China, and the wear of hydraulic structures caused by sand-laden water diversion has been paid more and more attention. Taking the spillway of a reservoir as the research object, the numerical model of erosion wear caused by sediment-laden particle flows on the spillway was established by using the computational fluid dynamics (CFD) method, VOF (Volume of Fluid) multiphase flow model and DPM (Discrete Phase Model). Through the simulation analysis of the spillway’s overall erosion, the distribution of the spillway erosion wear was obtained. Then, according to the main wear parts, the single variable, such as sediment diameter, sediment concentration, flow velocity and gate opening degree, was changed to study the erosion amount of the spillway and the distribution law of the spillway erosion parts. The results show that the main erosion sites of the spillway are at the bottom of the gate chamber and the middle section of the spillway. The maximum erosion increases linearly with the increase in sediment concentration. With the increase in sediment concentration, the sediment concentration changed from 1 kg/m3 to 6 kg/m3, and the maximum erosion of the spillway increased from 2.58 × 10−7 kg/m2 to 1.53 × 10−6 kg/m2. The erosion at the bottom of the spillway and gate leaf increases first and then decreases with the increase in sediment diameter and reaches the maximum value when the particle size is 0.002 mm. The erosion at the bottom of the spillway and the gate leaf increases with different growth trends as the flow velocity increases, when the flow velocity increases from 2 m/s to 9 m/s and the maximum erosion amount at the bottom of the spillway increases from 3.66 × 10−7 kg/m2 to 1.14 × 10−6 kg/m2, and the maximum erosion of the gate leaf increased from 1.66 × 10−8 kg/m2 to 8.98 × 10−6 kg/m2. The erosion amount at the bottom of the spillway increases with the increase in the gate opening between 0 and 3 m and tends to be stable when the gate opening is greater than 3 m. The maximum erosion position moves to the rear part of the spillway with the change in the gate opening. The change in the gate opening has no obvious effect on the erosion amount of the gate leaf but only changes the area of the gate erosion part. Thus, the erosion wear distribution of spillway under different work conditions is summarized, and the qualitative study between the erosion wear and the distribution of sediment diameter, sediment concentration, flow velocity and gate opening degree is made.

Determination of the Impact Speed of Eroded Particles in a Slurry Medium-Containing Quartz Sand for the Erosive-Corrosive Wear

Experimental study on erosion wear behavior of PFA coated stainless steel tube

Numerical simulation research for the effect of particle shape on the erosion wear in elbow

Study on the erosion wear characteristics and mechanisms of UBHMWPE/kaolin composites

Slurry erosion resistance of fusion-bonded epoxy powder coating

Numerical study of solid particle erosion on sidewall

An Impact Energy Erosion Model with an Energy Allocation Rule for the Discrete Element Method

Numerical Investigation of Erosion Wear Characteristics of Hydraulic Spillway

Experimental and Computational Investigations to Evaluate the Effects of Fluid Viscosity and Particle Size on Erosion Damage

Erosion wear characteristics of cemented carbide for mud pulser rotor

Slurry Erosive Wear Characteristics of Engineering Ceramics for Hydraulic Machinery

Study on Erosive Wear and Novel Wear-Resistant Materials for Centrifugal Slurry Pumps

Erosive Wear Performance and Mechanism of Engineering Ceramic Materials

Effect of impingement angle and impact velocity on slurry erosive wear behaviour of particulate reinforced aluminium composites

Study of erosion wear to concrete by different gravel particle sizes: Laboratory test and numerical simulation

Study on the Effects of Fluid Parameters on Erosion-Enhanced Corrosion of 90/10 Copper–Nickel Alloy Using Wire Beam Electrode

Insights into the relationship between particulate flow characteristics and local erosion behaviour under waterjet: The role of particle-fluid-surface interaction

Three-body abrasion behavior of ultrafine WC–Co hardmetal RX8UF with carborundum, corundum and silica sands in water-based slurries

Wear Behaviors of Cemented Carbide Cermet Yg8b under Different Concentrations of Abrasive Slurries from Carborundum, Corundum and Silica Sands

Investigation of Erosion Damages Induced by Wet Steam Containing Micro-Particles

Combined wear of slurry erosion, cavitation erosion, and corrosion on the simulated ship surface