Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Polylactide/Montmorillonite Nanocomposites In-situ Polymerization and Characterization

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Preparation and Structure of Polystyrene/Montmorillonite Nanocomposite

Preparation and structure of poly(styrene-acrylonitrile)/montmorillonite nanocomposite

Study on thermal stability of PP/MMT nanocomposites

Novel polylactide/vermiculite nanocomposites by in situ intercalative polymerization. I. Preparation, characterization, and properties

Preparation of poly(lactic acid)/Na-montmorillonite nanocomposite by microwave-assisted in-situ melt polycondensation

Studies on morphologies and thermal properties of poly(lactic acid)/polycaprolactone/organic-modified montmorillonite nanocomposites

Preparation and foaming extrusion behavior of polylactide acid/polybutylene succinate/montmorillonoid nanocomposite

Preparation and Characterization of Poly (trimethylene Terephthalate)/montmorillonite Nanocomposites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Microstructure-mechanical property relationships of polymer nanocomposite reinforced with lyophilized montmorillonite/carbon nanotubes hybrid particles

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Synthesis of Polymer Montmorillonite Nanocomposites Byin Situintercalative Polymerization

Synthesis and Properties of Poly(Methyl Methacrylate)/Montmorillonite (pmma/mmt) Nanocomposites

Preparation and Properties of Polypropylene/montmorillonite Layered Nanocomposites

Structure and properties of polylactide nano-composite polymerized in situ under microwave irradiation

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Microwave-Assisted Preparation of Polylactide/Organomontmorillonite Nanocomposites Via in Situ Polymerization

Structure and Properties of Polylactide/Poly(butylene Succinate)/organically Modified Montmorillonite Nanocomposites with High-Efficiency Intercalation and Exfoliation Effect Manufactured Via Volume Pulsating Elongation Flow

Synthesis of Poly (hexamethylene Terephthalamide)-Co-polycaprolactam/modified Montmorillonite Nanocomposites with Enhanced Mechanical Properties and Lower Water Absorption Rate by In-Situ Polymerization